CMX1100A/A2/D/D2/D3

Side Stand

Checking the Side Stand

Side stand springs

  • Check that the side stand operates smoothly. If the side stand is stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean grease.
  • Check the springs for damage or loss of tension.
  • CMX1100A/A2

    • Sit on the vehicle, shift the transmission to Neutral, and raise the side stand.

    CMX1100D/D2/D3

    Sit on the vehicle and raise the side stand.

  • CMX1100A/A2

    • Start the engine, pull the clutch lever in, and shift the transmission into gear.

    CMX1100D/D2/D3

    Start the engine and press the D/M side of N-D/M switch to switch the transmission into D mode.

  • Lower the side stand all the way. The engine should stop as you lower the side stand. If the engine doesn't stop, have your vehicle inspected by your dealer.

    • Recommended topic(s)

  • Parking
  • Starting the Engine
  • Shifting Gears