CMX1100A/A2/D/D2/D3

Riding mode

You can change the riding mode.

The riding mode consists of the following parameters.

The level of each parameter changes according to the selected riding mode.


P: Engine output level

EB: Engine brake level

D: CMX1100D/D2/D3 only DCT level

T: Torque Control level


Riding mode has four modes.

Available riding mode: STANDARD, SPORT, RAIN, USER 1 and USER 2.


STANDARD, SPORT and RAIN

  • STANDARD: Standard, all-around mode for a variety of situations.
  • SPORT: This mode is suitable for sports riding. You can feel the highest engine response.
  • RAIN: Good for stable riding on slippery surfaces such as rainy conditions.

    • These levels cannot be changed.


    USER 1 and USER 2

    Each value of initial setting can be changed.


    Initial setting

    P level

    EB level

    D level*3

    T level

    STANDARD

    2

    2

    2

    2

    SPORT

    3

    2

    3

    1

    RAIN

    1

    1

    1

    3

    USER 1

    2*1

    2*1

    2*1

    2*1, 2

    USER 2

    2*1

    2*1

    2*1

    2*1, 2

    Notes:

    *1 : Level can be changed.

    *2 : If off is selected, the level will change to 2 the next time the ignition is turned on.

    *3 : CMX1100D/D2/D3 only


    P level (Engine output level)

    P level has three setting levels.
    Available setting range: 1 to 3

  • Level 1 has the least power.
  • Level 3 has the most power.


    • EB level (Engine brake level)

    EB level has three setting levels.
    Available setting range: 1 to 3

  • Level 1 has the weakest engine braking effect.
  • Level 3 has the strongest engine braking effect.


    • D level (DCT level)

    CMX1100D/D2/D3 only

    D level has three setting levels.
    Available setting range: 1 to 3

  • Level 1 has the lowest engine revolution.
  • Level 3 has the highest engine revolution.


    • T level (Torque control level)

    T level has three setting levels or can be turned off.
    Available setting range: 1 to 3, or Off

  • Level 1 is the minimum Torque Control level.
  • Level 3 is the maximum Torque Control level.
  • Off deactivates the Torque Control.
  • If the electrical system is turned from off to on while the T level is set to Off, the T level is automatically set to 2.


    • Selecting the riding mode

  • Stop the vehicle.
  • Press the MODE switch with the throttle fully closed.

    • MODE switch

    Press the MODE switch

    USER 1

    RAIN

    STANDARD

    SPORT

    USER 2


    Setting the riding mode

    You can change the P, T, EB, and D (CMX1100D/D2/D3 only) levels of the USER riding mode.


  • Stop the vehicle.
  • Select the USER 1 or USER 2 riding mode.
  • Press and hold the MODE button until the parameter setting is displayed in the selectable area.

    • Parameter setting

  • Select the desired parameter and setting level.
  • To select the parameter, push the sel switch in the direction of or .
  • Press on the sel switch to select the setting level using or on the sel switch.
  • T level can be changed to 0 (off) by pressing and holding on the sel switch while selecting the T parameter.
  • Press and hold the MODE button until the parameter setting is hidden in the selectable area.


    • You can also change the levels on the USER riding mode in the setting mode of the instruments.

    Push the sel switch in the direction of

    Push the sel switch in the direction of

    Press on the sel switch

    Press on the sel switch

    Press and hold the MODE switch

    Press and hold on the sel switch

    CMX1100D/D2/D3 only

    Recommended topic(s)

  • Setting mode
  • Shifting Gears
  • Switches