Riding mode

You can change the riding mode.

The riding mode consists of the following parameters.

P: Engine output level

EB: Engine brake level

T: Torque control level

DAMPING (Suspension damping)

OVERALL: Suspension damping mode

FR: Suspension damping level

RR: Suspension damping level

PRELOAD (Rear suspension preload)

RIDER: Rider only (Minimum preload)

RIDER + CARGO: Rider and luggage

RIDER + PASSENGER: Rider and passenger

RIDER + PASSENGER + CARGO: Rider, passenger and luggage (Maximum preload)

Preload level

Riding mode has five modes.

Available riding modes: [STANDARD], [SPORT], [RAIN], [TOUR], and [USER].

In following four riding modes, you cannot change initial setting level.

[STANDARD]:

Standard, all-round mode for a variety of situations.

[SPORT]:

This mode is suitable for sports riding. You can feel the higher engine response compared to [STANDARD].

[RAIN]:

Good for stable riding on slippery surfaces such as rainy conditions.

[TOUR]:

Enables smooth acceleration even when riding with a passenger or a full load of luggage.

[USER]:

Each initial setting level can be changed.

Initial setting
Riding mode	P level	EB level	T level	DAMPING
				OVERALL	FR	RR
STANDARD	2	2	2	STANDARD	〇	〇
SPORT	3	1	1	SPORT	〇	〇
RAIN	1	2	3	RAIN	〇	〇
TOUR	2	2	2	TOUR	〇	〇
USER	2*	2*	2*	STANDARD*	〇*	〇*

Riding mode	PRELOAD
	RIDER	RIDER + CARGO	RIDER + PASSENGER	RIDER + PASSENGER + CARGO
STANDARD	7	11	15	19
SPORT	7	11	15	19
RAIN	7	11	15	19
TOUR	7	11	15	19
USER	7*	11*	15*	19*
Notes:
* : Level can be changed.

P level (Engine power output level)

P level has three setting levels.
Available setting range: 1 to 3

Level 1 has the least power.

Level 3 has the most power.

EB level (Engine brake level)

EB level has three setting levels.
Available setting range: 1 to 3

Level 1 has the weakest engine braking effect.

Level 3 has the strongest engine braking effect.

T level (Torque control level)

T level has three setting levels or can be turned off.
Available setting range: 0 to 3

Level 1 is the minimum Torque Control level.

Level 3 is the maximum Torque Control level.

Level 0 deactivates the Torque Control.

If you turn the ignition switch to the (Off) position while T level is 0, the setting is not maintained. The setting will be changed to level 2.

OVERALL (Suspension damping)

[OVERALL] has four setting mode.

Available setting range: [STANDARD] / [SPORT] / [RAIN] / [TOUR ]

FR/RR (Suspension damping)

[FR] and [RR] each have three setting levels.

Available setting range: + / 〇 / -

PRELOAD (Rear suspension preload)

[PRELOAD] has four setting mode and twenty three setting levels.

Available setting range (Mode): [RIDER] / [RIDER + CARGO] / [RIDER + PASSENGER] / [RIDER + PASSENGER + CARGO]

Available setting range (Level): 0 to 23

Level 23 has the maximum suspension preload.

Level 0 has the minimum suspension preload.

Selecting the riding mode

You can change the riding mode using the MODE switch.

Stop the vehicle.

Press the MODE switch with the throttle fully closed.

MODE switch

Press the MODE switch SPORT STANDARD RAIN TOUR USER

Setting the riding mode

You can change the P, EB, and T levels on the [USER] of the riding mode.

The [PRELOAD] (rear suspension) setting can also be set in the general menu.

General menu:

Stop the vehicle.

Select the [USER].

Press and hold the MODE switch.

Select the parameter using the or on the sel switch and shift to setting display using the on the sel switch.

Parameter

Select the setting level using the or on the sel switch.

T level can be changed to 0 (off) by pressing and holding the of the sel switch while selecting the T parameter.

Setting level

Press and hold the MODE switch until setting display closes.

You can also change the [USER] settings in setting mode.

RIDING MODE setting:

Recommended topic(s)
Adjusting the Rear Suspension
Adjusting the Front Suspension
Multi-information display