If the Honda SMART Key indicator flashes 5 times when the electrical system is turned on, or the operating range becomes unstable, replace the battery as soon as possible.
We recommend to see your dealer for this service.
Battery type:CR2032 or CR2032H
Remove the upper case by inserting a coin or a flat head screwdriver covered with a protective cloth into the slit.
Wrap a coin or a screwdriver with a protective cloth to prevent scratching the Honda SMART Key.
Do not touch the circuit or terminal. This may cause problems.
Be careful to avoid scratching the waterproof covering or allowing dust to enter.
Do not forcibly dismantle the Honda SMART Key body.
Protective cloth
Slit
Battery
Upper case
Replace the old battery with a new one with the positive ⊝ side facing up.
Snap the upper and lower cases back together.
Make sure that upper and lower cases are set in the right position.
3WARNING
CHEMICAL BURN HAZARD
The battery that powers the Honda SMART Key can cause severe internal burns and can even lead to death if swallowed.
Keep new and used batteries away from children.
If you suspect that a child has swallowed the battery, seek medical attention immediately.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Do not expose to excessive heat such as sunshine, fire or the like, that can result in an explosion or the leakage of flammable liquid or gas during use, storage or transportation.
Do not dispose of a battery into fire or a hot oven, or give mechanically crushing or cutting of a battery, that can result in an explosion.
Do not subject to extremely low air pressure at high altitude that may result in an explosion or the leakage of flammable liquid or gas.
Europe only
The battery is manufactured by:
Maxell, Ltd. 1 Koizumi, Oyamazaki, Oyamazaki-cho, Otokuni-gun, Kyoto 618-8525 Japan
Panasonic Energy Co., Ltd. 1-1 Matsushita-cho, Moriguchi City, Osaka 570-8511, Japan