Other Adjustments
Adjusting the Rear Suspension
Adjusting the suspension requires a pin spanner. We recommend that you have your vehicle serviced by your dealer.
Spring Preload
You can adjust the spring preload by the adjuster to suit the load or the road surface.
Use a pin spanner to turn the adjuster.
The standard position is 2.
Turning to the position 1 decreases spring preload (soft), position 3 to 5 increases spring preload (hard).
|
NOTICE Attempting to adjust directly from 1 to 5 or 5 to 1 may damage the shock absorber. Do not turn the adjuster beyond its limits. Adjust both left and right shock absorbers to the same spring preload. |
|
1 2 3 4 5 Pin spanner Adjuster |
|
NOTICE The rear shock absorber damper unit contains high pressure nitrogen gas. Do not attempt to disassemble, service, or improperly dispose of the damper. See your dealer. |
|
Recommended topic(s) |
|---|
|
|
|
|
|
|