CRF250R/RX

Electrical Trouble

Blown Fuse

Before handling fuses, see “Inspecting and Replacing Fuses.”

Main fuse

  • Disconnect the negative ⊝ terminal.
  • Pull back the coupler cover.
  • Disconnect the connector from the starter magnetic switch.
  • Remove the starter magnetic switch stay bolt.
  • Remove the starter magnetic switch cover.
  • Pull the main fuse and check for a blown fuse. Always replace a blown fuse with a spare of the same rating.

    • Coupler cover

    Connector

    Spare main fuse

    Main fuse

    Starter magnetic switch cover

    Starter magnetic switch stay bolt

    Starter magnetic switch

  • Install the starter magnetic switch cover.
  • Install and tighten the starter magnetic switch stay bolt.
  • Install the connector and coupler cover.
  • Connect the negative ⊝ terminal.


    • NOTICE

    If a fuse fails repeatedly, you likely have an electrical problem. Have your vehicle inspected by your dealer.

    Recommended topic(s)

  • Fuses
  • Battery
  • Storing Your Vehicle