Instruments

Setting mode

To shift to the setting mode

Select the general menu.

Select the setting mode.

Press on the sel switch, and then display moves to the setting mode.

Operation while driving is prohibited.

To return to the ordinary display

Press on the sel switch until return to the ordinary display.

Turn the electrical system is off and on again.

Setting flow

RIDING MODE

USER MODE

You can change the setting value of the USER MODE.

Select the USER 1 or USER 2 using or of the sel switch.

Select the parameter ("P", "EB" "D", "T" or "ABS") using or of the sel switch.

Select the desired setting value using or of the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

PRESET MODE

You can confirm the preset riding mode setting value of the [STANDARD], [SPORT], [RAIN] and [GRAVEL].

Select the PRESET MODE using of the sel switch.

Select the desired riding mode using or of the sel switch.

Press on the sel switch to return to the USER MODE.

Return to the ordinary display.

To continue setting, press on the sel switch to return to the upper hierarchy.

SHIFT POINT

(On ) / (Off) :
You can activate or deactivate the shift indicator.

SHIFT POINT :
You can change the engine revolutions at which the tachometer start blinking in the shift indicator.

Select the (On) or (Off) using or on the sel switch.

When select the  (On)

Press on the sel switch to select the desired setting (r/min) using or on the sel switch.

Press on the sel switch to complete the setting.

When select the  (Off)

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

SELF CANCELLING TURN SIGNALS

You can enable or disable turn signal automatic cancellation.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

DRL

You can enable or disable DRL.

Select the (Auto) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

TRIP A AUTO RESET

You can enable or disable the tripmeter A automatic reset mode.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

ECO INDICATOR

You can enable or disable the ECO indicator.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

DISPLAY TYPE

You can change the display type.

Select the display type ("BAR", "CIRCLE" or "SIMPLE") using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

BRIGHTNESS

You can adjust the backlight brightness to one of the eight levels or select the auto adjustment.

Automatic brightness control:

The display can become dark when the display is very hot. If it does not restore the original brightness, contact your dealer.

Select the "AUTO" or "MANUAL" using or on the sel switch.

When select the "AUTO"

Press on the sel switch to complete the setting.

When select the "MANUAL"

Press on the sel switch to select the backlight brightness using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

BACKGROUND

You can change the setting of the background to one of the two colors or select the auto adjustment.

Select the background colour using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

FAVORITE INFORMATION

You can change the information items displayed in the INFO area and status mode.

1 line information

You can change the information items displayed in the INFO area.

1 line information setting:

2 line information

You can change the information items displayed in the information page of status mode.

2 line information setting:

Select the 1 line or 2 line information using or on the sel switch.

Press on the sel switch, display moves to the 1 line or 2 line information setting.

1 line information setting

Select the 1 or 2 using or on the sel switch.

Press on the sel switch to select the information items.

Select the desired information setting using or on the sel switch.

Press on the sel switch, set the information item.

Items that have already been set are displayed with a green cursor.

Up to 10 items are available. (Including BLANK)

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

2 line information setting

Page Upper row Lower row Information item (Upper) Information item (Lower)

Select the desired page using or on the sel switch.

Press on the sel switch to select the upper or lower row.

Select the upper or lower row using or on the sel switch.

Press on the sel switch to select the information items.

Select the desired information item using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

FAVORITE SWITCH

"TRIP RESET" is displayed but not selectable.

AIR TEMP

You can display or hide the air temperature gauge.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

DATE & TIME

Select the "Day","Month", "Year", "Hour", "Minute", "24h or 12h" or "AM / PM" using or on the sel switch.

Select the desired setting using or on the sel switch.

When "24 / 12" is set to 24-hour indication, "AM / PM" cannot be usable.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

Setting range

Date: 1 to 31

Month: JAN to DEC

Year: 2020 to 2099

Hour: 0 to 23

Minute: 00 to 59

24/12: 24 or 12

AM/PM: AM or PM

UNIT

You can change the speed and mileage (ED,II ED, III ED, IV ED type), and fuel mileage meter units.

Select the "SPEED" (ED,II ED, III ED, IV ED type) or "FUEL CONS." using or on the sel switch.

Select the desired setting using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

If you want to select "L/100km" or "km/L" for fuel consumption, "km/h" must be selected in the "SPEED" menu in advance.

ED,II ED, III ED, IV ED type

If you want to select "mile/gal" or "mile/L" for fuel consumption, "mph" must be selected in the "SPEED" menu in advance.

LANGUAGE

Changes the system language.

Select the 1 or 2 using or on the sel switch.

Press on the sel switch.

Select the language using or on the sel switch.

Press on the sel switch to select the language.

Items that have already been set are displayed with a green cursor.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

RESTORE DEFAULT

The set values can be returned to the default settings.

Select the “NO” (not restore) or “YES”(restore) using the or on the sel switch.

When the “NO” is selected
Press the on the sel switch. The set value is maintained, and then the display returns to the upper level hierarchy.
When the “YES” is selected
Press and hold the on the sel switch. The set value return to default setting.

The following items are restored to their default values:

RIDING MODE

SHIFT POINT

TRIP A AUTO RESET

DISPLAY TYPE

BRIGHTNESS

BACKGROUND

FAVORITE INFORMATION

The page of the currently selected INFO area and status mode are also initialized.

FAVORITE SWITCH

UNIT

LANGUAGE

SELF CANCELLING TURN SIGNALS

ECO INDICATOR

AIR TEMP

BLUETOOTH PAIRING RESET

ED, II ED, III ED, IV ED type

You can reset the pairing record of Bluetooth^®.

To connect the device

Select the “NO” (not reset) or “YES”(reset) using the or on the sel switch.

When the “NO” is selected
Press the on the sel switch. The pairing record is maintained, and then the display returns to the upper level hierarchy.
When the “YES” is selected
Press and hold the on the sel switch. The pairing record is reset.

If the pairing information remains in your smartphone even if the pairing information is deleted from the vehicle, the smartphone may be connected to the vehicle again.

MAINTENANCE

You can select the following:

PERIODIC MAINTENANCE

OIL CHANGE

BATTERY VOLTAGE

WATER TEMP

WARNING INFO

PERIODIC MAINTENANCE OIL CHANGE BATTERY VOLTAGE WATER TEMP WARNING INFO Press on the sel switch. Press on the sel switch. Press the on the sel switch

PERIODIC MAINTENANCE

You can check the next periodic inspection time.

You can program a reminder for the next periodic inspection time.

Distance Month Year Date

Display range:

Distance:

ED,II ED, III ED, IV ED type

------, 12,000 to -99,999 km (8,000 to -99,999 mile)

Pass 0 km (0 mile): “-” mark is displayed.

Changing the SPEED unit from "mile" to "km" will also display ranges over 12,000 km, depending on the distance.

GS,II GS type

------, 12,000 to -99,999 km

Pass 0 km: “-” mark is displayed.

Date:

Month: ---, JAN to DEC
Year: ----, 2020 to 2099

Next inspection setting

Select the distance, month or year using or on the sel switch.

Distance Month Year Date

Select the desired setting using or on the sel switch.

If you press and hold on the sel switch while setting the distance, it will move every 1000.

Available setting range of the distance:

ED,II ED, III ED, IV ED type

------, 100 to 12,000 km (100 to 8,000 mile)

Initial setting:------

GS,II GS type

------, 100 to 12,000 km

Initial setting:------

Available setting range of the date:

Month:---, JAN to DEC

Initial setting:---

Year: ----, 2020 to 2099

Initial setting:----

Maintenance information () will not be displayed if the distance and date are set to the initial settings.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

OIL CHANGE

You can check the next engine oil change.

You can program a reminder for the next engine oil change.

Distance Month Year Date

Display range:

Distance:

ED,II ED, III ED, IV ED type

------, 12,000 to -99,999 km (8,000 to -99,999 mile)

Pass 0 km (0 mile): “-” mark is displayed.

Changing the SPEED unit from "mile" to "km" will also display ranges over 12,000 km, depending on the distance.

GS,II GS type

------, 12,000 to -99,999 km

Pass 0 km: “-” mark is displayed.

Date:

Month: ---, JAN to DEC
Year: ----, 2020 to 2099

Next oil change setting

Select the distance, month or year using or on the sel switch.

Distance Month Year Date

Select the desired setting using   or on the sel switch.

If you press and hold on the sel switch while setting the distance, it will move every 1000.

Available setting range of the distance:

ED,II ED, III ED, IV ED type

------, 100 to 12,000 km (100 to 8,000 mile)

Initial setting:------

GS,II GS type

------, 100 to 12,000 km

Initial setting:------

Available setting range of the date:

Month:---, JAN to DEC

Initial setting:---

Year: ----, 2020 to 2099

Initial setting:----

Maintenance information () will not be displayed if the distance and date are set to the initial settings.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

When reaching any of the following, the pop-up information is appears in the ordinary display.

“500 km” (“300 mile”) from the next periodic inspection.

“100 km” (“60 mile”) from the next engine oil change.

One month before the set month.

Oil change information Periodic inspection

BATTERY VOLTAGE

Displays the current voltage.

WATER TEMP

Displays the current coolant temperature.

Display range: 35°C to 132°C

34°C or less: “---” is displayed.

Between 122°C and 131°C:

High coolant temperature indicator and warning indicator come on.

The high coolant temperature indicator is displayed in the warning information.

Coolant temperature digits flash.

Above 132°C:

High coolant temperature indicator and warning indicator come on.

The high coolant temperature indicator is displayed in the warning information.

“132°C” flashes.

Even if the engine coolant temperature is low, the cooling fan may start running when you rev up the engine. This is normal.

If the coolant temperature “--- ” flashes.

WARNING INFO

Displays a current maintenance information, helpful information and (or) warning information.

If your vehicle has warning information, have your vehicle inspected by your dealer as soon as possible.

Maintenance information Warning information Helpful Information

EQUIPMENT

"EQUIPMENT" is displayed but not selectable.

SYSTEM INFORMATION

Displays the software version and hardware information.

Recommended topic(s)
Riding mode
INFO area
Switches