Instruments

Street mode

Display Check

When the ignition switch is turned to the (On) position, the opening symbol will show on the display. If the display itself does not shows when it should, have your dealer check for problems.

You can select the street mode or circuit mode display.

To change to the circuit mode:

Clock (12-hour display)

To set the clock:

Speedometer

Tachometer red zone

(excessive engine rpm range)

Gear position indicator

Shows 1st to 6th gear positions. “-”appears when the transmission is not shifted properly.

Quick Shifter indicator

Displays the current status of the Quick Shifter.

： ： Quick Shifter system is disabled. Quick Shifter upshifting is enabled. Quick Shifter downshifting is enabled. ： Quick Shifter upshifting and downshifting are both enabled. ：

QUICK SHIFTER:

Multi-information display

Tachometer

NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life.

Circuit mode

Display Check

When the ignition switch is turned to the (On) position, the opening symbol will show on the display. If the display itself does not shows when it should, have your dealer check for problems.

To change to the circuit mode :

Press and hold the LAP button with your vehicle stopped.

To return to the street mode display, press and hold the LAP button.

Select the “CIRCUIT” menu on the “DISPLAY” screen.

To return to the street mode display, select the “STREET” menu on the “DISPLAY”.

Lap timer

LAP button

Recommended topic(s)
FUNCTION
DISPLAY
GENERAL