CBR600RR

Indicators

If one of these indicators does not come on when it should, have your dealer check for problems.

No.

Indicators

Name

Status of Indicatiors

a

Shift indicators

Comes on briefly when the ignition switch is turned to the (On) position.

b

High coolant temperature indicator

Comes on briefly when the ignition switch is turned to the (On) position.

If it comes on while riding:

c

Right turn signal indicator

-

d

ABS (Anti-lock Brake System) indicator

Comes on when the ignition switch is turned to the (On) position. Goes off when your speed reaches approximately 10 km/h (6 mph).

f it comes on while riding:

e

Neutral indicator

Comes on when the transmission is in Neutral.

f

HESD (Honda Electronic Steering Damper) indicator

Comes on briefly when the ignition switch is turned to the (On) position.

If it comes on while engine is running:

g

PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL)

Comes on briefly when the ignition switch is turned to the (On) position.

GS type

If it comes on while engine is running:

ED, II ED type

If it comes on or blinks while engine is running:

h

High beam indicator

-

i

HISS indicator

  • Comes on briefly when the ignition switch is turned to the (On) position. Goes off if the ignition key has the correct coding.
  • Flashes every 2 seconds for 24 hours when the ignition switch is turned to the (Off) position.

    • j

    Low fuel indicator
  • Comes on briefly when the ignition switch is turned to the (On) position.
  • Comes on when there is only reserve fuel left in the fuel tank. Remaining fuel when low fuel indicator comes on: 4.0 L (1.1 US gal, 0.9 Imp gal)

    • If it comes on:

    k

    Low oil pressure indicator

    Comes on when the ignition switch is turned to the (On) position. Goes off when the engine starts.

    If it comes on while engine is running:

    l

    Left turn signal indicator

    -

    m

    Torque Control OFF indicator

    Comes on when the Torque Control is turned off.

    n

    Torque Control indicator
  • Comes on when the ignition switch is turned to the (On) position. Goes off when your speed reaches approximately 5 km/h (3 mph) to indicate Torque Control is ready to work.
  • Blinks when Torque Control is operating.

    • If it comes on while riding:


    Shift Indicators

    The shift indicators light or blink by the engine revolutions. The first indicator lights when the engine revolutions reach a number 800 r/min (rpm) below a preset revolution number.
    The second, third and fourth indicators will light each time the engine revolutions is 200 r/min (rpm) rise.
    All indicators will blink when engine revolutions is reached the set value.


    Setting of the Shift Indicators

    You can change the engine revolutions at which the shift indicators start blinking.


    Initial setting: OFF

    Available setting range:
    4,000 - 17,500 r/min (rpm)


    Example set value: 11,600 r/min (rpm)

    0 to 10,800 r/min (rpm)
    All indicators go off

    10,800 r/min (rpm)
    First indicator comes on

    11,000 r/min (rpm)
    Second indicator comes on

    11,200 r/min (rpm)
    Third indicator comes on

    11,400 r/min (rpm)
    Fourth indicator comes on

    11,600 r/min (rpm)
    All indicators blink


    Recommended topic(s)

  • Torque Control Indicator
  • ABS (Anti-lock Brake System) Indicator
  • PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL)