Riding mode

You can change the riding mode.

The riding mode consists of the following parameters.

P: Engine output level

T: Torque control level

W: Wheelie control level

EB: Engine brake level

When “-” is displayed, go to your dealer for service.

Current riding mode P value T value EB value W value

Riding mode has five modes.
Available riding mode: MODE 1, MODE 2, MODE 3, USER 1 and USER 2.

MODE 1, MODE 2 and MODE 3

MODE 1 is suitable for track riding.

MODE 2 is suitable for winding roads.

MODE 3 is suitable for street riding.

Each value can not be changed.

USER 1 and USER 2

Each value can be changed.

Initial setting
Riding modes	P value	T value	W value	EB value
MODE 1	1	2	1	3
MODE 2	2	5	2	3
MODE 3	5	8	3	1
USER 1	1*1	5*1	2*1	1*1
USER 2	2*1	5*1	2*1	2*1
Notes:
*1 : Value can be changed

P value (Engine output level)

P value has five setting levels.
Available setting range: 1 to 5

Level 1 has the most power.

Level 5 has the least power.

T value (Torque control level)

T value has ten setting levels.
Available setting range: 0 to 9

Level 1 is the minimum Torque Control level.

Level 9 is the maximum Torque Control level.

Level 0 deactivates the Torque Control.

When the T value is set to 0, the W value automatically changes 0.

W value (Wheelie control level)

W value has four setting levels.
Available setting range: 1 to 3

Level 1 is the minimum Wheelie Control level.

Level 3 is the maximum Wheelie Control level.

Level 0 deactivates the Wheelie Control.

EB value (Engine brake level)

EB value has three setting levels.
Available setting range: 1 to 3

Level 1 has the strongest engine braking effect.

Level 3 has the weakest engine braking effect.

Selecting the riding mode

Stop the vehicle.

Select the riding mode display.

Press the SEL (up) or SEL (down) button with the throttle fully closed.

SEL (up) button SEL (down) button MODE button

Press the SEL (up) button Press the SEL (down) button MODE 1 MODE 2 MODE 3 USER 1 USER 2

Setting the riding mode

You can change the P, T, W and EB values on the USER 1 and USER 2 of the riding mode.

Stop the vehicle.

Select the USER 1 or USER 2 in the riding mode you want to set.

Press and hold the MODE button until P value is selected.

Press the SEL (up) or SEL (down) button until the desired value is displayed.

Press the MODE button until T value is selected.

Press the SEL (up) or SEL (down) button until the desired value is displayed.

T value can be changed to level 0 by pressing and holding the SEL (down) button at the time of level 1.

Press the MODE button until W value is selected.

Press the SEL (up) or SEL (down) button until the desired value is displayed.

Press the MODE button until EB value is selected.

Press the SEL (up) or SEL (down) button until the desired value is displayed.

Press and hold the MODE button until ordinary display is displayed.

You can stop setting the riding modes at any time by pressing and holding the MODE button.

Press the MODE button Press and hold the MODE button Press the SEL (up) button Press the SEL (down) button Press and hold the SEL (down) button

Recommended topic(s)
Setting mode
FUNCTION
SERVICE