Instruments

Lap Timer

You can record lap time in the circuit mode.

Stopwatch/ difference with the best lap Previous lap time Previous lap number

You can check and clear the recorded lap time data in the setting mode.

Best icon (Displayed when the fastest lap time displayed.) Lap number Lap time Time stamp Maximum vehicle speed Maximum coolant temperature Maximum engine revolutions

The lap time data include lap time, maximum vehicle speed, maximum engine revolutions, maximum coolant temperature, maximum acceleration, maximum deceleration, maximum left bank angle and maximum right bank angle.

Display range:

Previous lap number: 0 to 50

Exceeds 50, repeats the “50”

Previous lap time: 00'00"00 to 99'59"99

Exceeds 99'59"99, returns to the “00'00"00”

Stopwatch: 00'00"00 to 99'59"99

Exceeds 99'59"99, returns to the “00'00"00”

Difference with the best lap:

-99'59"99 to 00'00"00 to +99'59"99

Maximum vehicle speed:
0 to 299 km/h (0 to 186 mph)

Maximum engine revolutions:
0 to 20000 r/min (rpm)

Maximum coolant temperature:
-40 to 150°C

Maximum acceleration: 0 to 3.2 G

Maximum deceleration: 0 to 3.2 G

Maximum left bank angle:
0 to 90 deg

Maximum right bank angle:
0 to 90 deg

To Measure the Lap Time

Press and hold the LAP button or select the “CIRCUIT” menu on the “DISPLAY MODE” menu screen.

To start measurement, press the LAP button.

The stopwatch starts measurement.

Stopwatch

To record lap time, press the LAP button at each lap.

The stopwatch changes to display of the difference with the best lap.
After 10 seconds, the display will return to the stopwatch.

The previous lap time and previous lap number change to the information of the previous lap.

If you press the LAP button again within two seconds, lap time is not recorded.

When exceeds 50 lap, the previous lap number repeats the “LAP 50”.

Previous lap number Previous lap time Difference with the best lap

To end measurement, press and hold the LAP button.

To restart the measurement

Press the LAP button again. The stopwatch restarts measurement.

Measurement starts from the next lap.

To Check or Clear the Lap Time

Select the “LAP TIME” menu in the setting mode.

Recommended topic(s)
LAP TIME
DISPLAY
GENERAL