Instruments

Do not operate the display functions for a long time with the engine stopped. It may result in a low (or dead) battery.

  • Speedometer/Tachometer/Riding mode area
  • Status bar
  • Selectable area
  • INFO area /Pop-up information
  • Gear position indicator area
  • Fuel gauge

  • The meter has three display types.

    The display and arrangement change depending on each display type.

    Initial setting is BAR.

  • Tachometer is available when display type is BAR or CIRCLE.
  • To change the display type:


    Display type: CIRCLE

  • Riding mode
  • Tachometer
  • Selectable area
  • INFO area/Pop-up information
  • Speedometer
  • Fuel gauge
  • Gear position indicator

  • Display type: SIMPLE

  • Riding mode
  • Speedometer
  • Selectable area
  • INFO area/Pop-up information
  • Fuel gauge
  • Gear position indicator

  • Status bar

  • Status icons
  • Displays the Honda RoadSync status.

  • High beam indicator
  • Warning indicator
  • Comes on when your vehicle has warning information.

    Also it is displayed as pop-up information in the INFO area.

  • Air temperature gauge
  • Displays air temperature.

    Display range: -10 to 50 ℃

  • Below -10 ℃: “---” is displayed.
  • Above 51 ℃: “50 ℃” is flashed.
  • Clock (12-hour or 24-hour display)
    To set the clock:

  • Speedometer/Tachometer/Riding mode area


    Display type: BAR

  • Tachometer
  • Tachometer is available when display type is BAR or CIRCLE.

    The tachometer colour changes when the engine revolutions exceed the set value of SHIFT POINT.

    You can turn on/off this function.

    SHIFT POINT setting:

    DISPLAY TYPE setting:

    NOTICE

    Do not operate the engine in the tachometer red zone. Excessive engine speed can adversely affect engine life.

  • Tachometer red zone
    (excessive engine rpm range)
  • Speedometer
  • Riding mode
  • Displays current riding mode.


    Gear position indicator


  • Gear position indicator
  • The gear position is shown in the gear position indicator.


    Fuel gauge

    NOTICE

    You should refuel when the reading approaches the E (1st) segment. Running out of fuel can cause the engine to misfire, damaging the catalytic converter.

  • If the fuel gauge indicator flashes in a repeat pattern or turns off:
  • Remaining fuel when only 1st (E) segment starts flashing: approximately 3.1 L (0.82 US gal, 0.68 Imp gal)

    Recommended topic(s)

  • Setting mode
  • Multi-information display
  • Pop-up information