Main Components
|
Overall length |
2,090 mm (82.3 in) | |
|
Overall width |
780 mm (30.7 in) | |
|
Overall height |
1,085 mm (42.7 in) | |
|
Wheelbase |
1,420 mm (55.9 in) | |
|
Minimum ground clearance |
140 mm (5.5 in) | |
|
Caster angle |
Except MA, II MA type |
25° 0′ |
|
MA, II MA type |
25° | |
|
Trail |
99 mm (3.9 in) | |
|
Curb weight |
Except KO, II KO, III KO type 192 kg (423 lb) | |
|
KO, II KO, III KO type 190 kg (419 lb) | ||
|
Except KO, II KO, III KO, II MX, III MX, IV MX, IV CO, V CO, VI CO type 180 kg (397 lb) | ||
|
KO, II KO, III KO type 160 kg (353 lb) | ||
|
II MX, III MX, IV MX, IV CO, V CO, VI CO type 166 kg (366 lb) | ||
|
Maximum luggage weight*2 |
ED, II ED, III ED, IV ED, V ED, VI ED type 13.5 kg (30 lb) | |
|
Passenger capacity |
Rider and 1 passenger | |
|
Minimum turning radius |
Except MA, II MA, KO, II KO, III KO type 2.74 m (9.0 ft) | |
|
MA, II MA, KO, II KO, III KO type 2.7 m (8.9 ft) | ||
|
Displacement |
755 cm3 (46.1 cu-in) | |
|
Bore x stroke |
87.0 x 63.5 mm (3.43 x 2.50 in) | |
|
Compression ratio |
11.0:1 | |
|
Fuel |
Unleaded petrol | |
|
Recommended: 91 RON or higher | ||
|
Fuel containing alcohol |
Except TH, III TH type ETHANOL up to 10 % by volume | |
|
TH, III TH type ETHANOL up to 20 % by volume | ||
|
Tank capacity |
15.2 L (4.02 US gal, 3.34 Imp gal) | |
|
Battery |
YTZ10S | |
|
Gear ratio |
1st |
3.000 |
|
2nd |
2.187 | |
|
3rd |
1.650 | |
|
4th |
1.320 | |
|
5th |
1.096 | |
|
6th |
0.939 | |
|
Reduction ratio (primary / final) |
1.777 / 2.812 | |
Service Data
|
Tyre size |
Front |
120/70ZR17M/C (58W) |
|
Rear |
160/60ZR17M/C (69W) | |
|
Tyre type |
Radial, tubeless | |
|
Recommended Tyre |
Front |
DUNLOP Roadsport2 L |
|
Except GS, II GS, III GS MICHELIN ROAD 6 | ||
|
Rear |
DUNLOP Roadsport2 L | |
|
Except GS, II GS, III GS MICHELIN ROAD 6 | ||
|
Tyre category of use*1 |
Normal |
Permitted |
|
Special |
Not Permitted | |
|
Snow |
Not Permitted | |
|
Moped |
Not Permitted | |
|
Tyre air pressure |
Front |
250 kPa (2.50 kgf/cm2, 36 psi) |
|
Rear |
290 kPa (2.90 kgf/cm2, 42 psi) | |
|
Minimum tread depth |
Front |
1.5 mm (0.06 in) |
|
Rear |
2.0 mm (0.08 in) | |
|
Spark plug |
(standard) |
SILMAR8A9S (NGK) |
|
Spark plug gap |
0.8 - 0.9 mm (0.031 - 0.035 in) | |
|
Idle speed |
1,300 ± 100 rpm | |
|
Honda 4-stroke motorcycle oil API Service Classification SJ or higher, excluding oils marked as “Energy Conserving” or “Resource Conserving,” SAE 10W-30, JASO T 903 standard MA | ||
|
Engine oil capacity |
After draining |
3.3 L (3.5 US qt, 2.9 Imp qt) |
|
After draining & engine oil filter change |
3.5 L (3.7 US qt, 3.1 Imp qt) | |
|
After disassembly |
3.8 L (4.0 US qt, 3.3 Imp qt) | |
|
Recommended brake fluid |
Honda DOT 4 Brake Fluid | |
|
Cooling system capacity |
Except MA, II MA type 1.53 L (1.62 US qt, 1.35 Imp qt) | |
|
MA, II MA type 1 L (1 US qt, 1 Imp qt) | ||
|
Recommended coolant |
Except Singapore, Hong Kong, India, Malaysia, and Thailand Pro Honda HP Coolant | |
|
Singapore, Hong Kong, India, Malaysia, and Thailand HONDA PRE-MIX COOLANT | ||
|
Recommended drive chain lubricant |
Drive chain lubricant designed specifically for O-ring chains If not available, use SAE 80 or 90 gear oil. | |
|
Drive chain slack |
25 - 35 mm (1.0 - 1.4 in) | |
|
Standard drive chain |
DID520VM5 or RK520KZOZ2 | |
|
No. of links |
114 | |
|
Standard sprocket size |
Drive sprocket |
16T |
|
Driven sprocket |
45T | |
Bulb
|
Headlight |
LED | ||
|
Brakelight/Taillight |
LED | ||
|
Front turn signal/Position light |
LED | ||
|
Rear turn signal |
LED | ||
|
License plate light |
12 V-5 W |
Fuse
|
Main fuse |
30 A | |||
|
Other fuse |
30 A, 15 A, 10 A | |||
|
Recommended topic(s) |
|---|
|
|
|
|
|
|