CBR1000SP/ST

Coolant

Adding Coolant

If the coolant level is below the LOWER level mark, add the recommended coolant () until the level reaches the UPPER level mark.

Add fluid only from the reserve tank cap and do not remove the radiator cap.

  • Remove the middle cowl bolts.
  • Pull the middle cowl outward carefully and hook the rib on the stopper of the upper inner panel.

    • Middle cowl

    Bolt

    Bolt

    Rib

    Stopper

    Inner Panel

  • Remove the reserve tank cap and add fluid while monitoring the coolant level.
  • Do not overfill above the UPPER level mark.
  • Make sure no foreign objects enter the reserve tank opening.
  • Securely reinstall the reserve tank cap.
  • Install the parts in the reverse order of removal.
  • Tighten the middle cowl bolts.

    • Torque: 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)

    Reserve tank cap

    3WARNING

    Removing the radiator cap while the engine is hot can cause the coolant to spray out, potentially scalding you.


    Always let the engine and radiator cool down before removing the radiator cap.

    Recommended topic(s)

  • Checking the Coolant
  • Overheating (High coolant temperature indicator is on)
  • Adding Engine Oil