Riding mode

You can change the riding mode.

The riding mode consists of the following parameters.

P: Engine output level

T: Torque control level

W: Wheelie control level

EB: Engine brake level

CBR1000SP
S: Suspension mode

When “-” is displayed, go to your dealer for service.

Current riding mode P value T value EB value S mode W value

Riding mode has three modes.
Available riding mode: MODE 1, MODE 2, or MODE 3.

Each value can be changed.

CBR1000SP

Setting of S mode can be changed.

P value (Engine output level controlled by 2-motor throttle by wire system.)

P value has five setting levels.
Available setting range: 1 to 5

Level 1 and 2 have the most power and response, with level 1 using the 2-motor throttle by wire system for smooth control.

Level 5 has the least power.

T value (Torque control level)

T value has ten setting levels.
Available setting range: 0 to 9

Level 1 is the minimum Torque Control level.

Level 9 is the maximum Torque Control level.

Level 0 deactivates the Torque Control.

When the T value is set to 0, the W value automatically changes 0.

If the electrical system is turned from off to on while the T value is set to 0, the T value is automatically set to 1. W value returns to the level before T value was set to 0.

W value (Wheelie control level)

W value has four setting levels.
Available setting range: 1 to 3

Level 1 is the minimum Wheelie Control level.

Level 3 is the maximum Wheelie Control level.

Level 0 deactivates the Wheelie Control.

EB value (Engine brake level controlled by 2-motor throttle by wire system.)

EB value has three setting levels.
Available setting range: 1 to 3

Level 1 has the strongest engine braking effect.

Level 2 has strong engine braking effect.

Level 3 has the weakest engine braking effect.

S mode (Suspension mode)

CBR1000SP

S mode has six modes.
Available modes: A1, A2, A3, M1, M2, and M3

Adjusting the ÖHLINS Smart EC system

Selecting the riding mode

The riding mode changes each time the MODE switch is pressed.

When the riding mode is changed the P, T, W, and EB values are appeared briefly in the INFO area.

CBR1000SP

The S value also appears.

MODE switch

Current riding mode

Press the MODE switch MODE 1 MODE 2 MODE 3

Setting the riding mode

CBR1000ST

You can change the P, T, W, and EB values.

CBR1000SP

You can change the P, T, W, EB values, and S mode.

You can change the riding mode setting from the setting mode of display.

The value displayed in FAVORITE can be changed without shifting to the setting mode of display.

FAVORITE

Select the riding mode you want to set.

To change the type of parameter displayed in FAVORITE

Press and hold the sel up switch or sel down switch to select the parameter.

To change the value of parameter displayed in FAVORITE

Press the sel up or sel down switch to select the value.

The T value cannot be set to 0 in FAVORITE.

To set the T value to 0, set in the setting mode of the display.

CBR1000SP Press and hold the sel up switch Press the sel down switch Press the sel up switch Press and hold the sel down switch Sel up switch Sel down switch

Recommended topic(s)
Start Mode
Instruments
Adjusting the ÖHLINS Smart EC System