Instruments

Setting mode

To shift to the setting mode

Push and hold the of the sel left/right switch.

To select the desired setting menu, operate the sel up switch, sel down switch, sel left/right switch on the left handle.

When switching to setting mode, the clock, indicator, and speed are displayed at the top of the screen.

To complete the setting:

Push and hold the of the sel left/right switch, return to the upper hierarchy.

Push and hold the MODE switch, return to the ordinal display.

RIDING MODE

You can select the RIDING MODE.

Select the “MODE 1”, “MODE 2”, or “MODE 3” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

CBR1000ST

“S” (suspension mode) is not displayed.

Return to the ordinary display or upper hierarchy to complete the setting.

Default setting mark

To return to the initialize settings:

Push and hold the of the sel left/right switch.

Reset the setting according to the switch operation guide.

PRELOAD GUIDE

CBR1000SP 

You can adjust the rider's weight.

Available setting range

50 to 100 kg (110 to 220 lb)

If the weight is outside the setting range, set the closet value.

To adjust the rider's weight

Adjust to the desired setting, using the sel up or sel down switch.

The sel up or sel down switch is pressd, increase or decrease by 5kg (10 lb).

Recommended preload values for front and rear suspension are displayed.

You can change the unit by push the of the sel left/right switch.

Return to the ordinary display or upper hierarchy to complete the setting.

Recommended preload values

To return to the initialize settings:

Push and hold the of the sel left/right switch.

Reset the setting according to the switch operation guide.

SUSPENSION A MODE

CBR1000SP

You can change the levels of OBTi support items.

Adjusting the ÖHLINS Smart EC system

Select the “A 1”, “A 2”, or “A 3” using the sel up or sel down switch.

Push the of the sel left/right switch.

Select to the desired setting according to the switch operation guide.

Return to the ordinary display or upper hierarchy to complete the setting.

Default setting mark

To return to the initialize settings:

Push and hold the of the sel left/right switch.

Reset the setting according to the switch operation guide.

SUSPENSION M MODE

CBR1000SP

You can adjust the compression and rebound damping of the front and rear suspension electronically.

Adjusting the ÖHLINS Smart EC system

Select the “M 1”, “M 2”, or “M 3” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

Return to the ordinary display or upper hierarchy to complete the setting.

Default setting mark

To return to the initialize settings:

Push and hold the of the sel left/right switch.

Reset the setting according to the switch operation guide.

QUICK SHIFTER

CBR1000SP

You can change the setting of the Quick Shifter.

UP: Change the setting for upshifting.

DOWN: Change the setting for downshifting.

OFF	Deactivate
SOFT	Activate
MEDIUM
HARD

SOFT, MEDIUM, or HARD indicate the load level of the shift pedal.

To use the Quick Shifter:

Select the “UP” or “DOWN” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

Return to the ordinary display or upper hierarchy to complete the setting.

STEERING DAMPER

You can change the damping level of the steering damper.

The steering damping level can be selected from “SOFT”, “MEDIUM”, or “HARD”.

Each level's characteristics

SOFT: More agile steering feel. (Default setting level)

MEDIUM: Medium steering damping level between “SOFT” and “HARD”.

HARD: More stable steering feel on high speed riding.

Select the steering damping level from “SOFT”, “MEDIUM”, or “HARD” using the sel up or sel down switch.

Return to the ordinary display or upper hierarchy to complete the setting.

You can also complete the setting by pressing the of the sel left/right switch.

ABS MODE

You can change the ABS mode.

The operate functions depending on the ABS mode.

The ABS mode can be selected from the “ABS1 (RACE)”, “ABS2 (TRACK)” or “ABS (STANDARD)”.

Select the “ABS1 (RACE)”, “ABS2 (TRACK)” or “ABS (STANDARD)” using the sel up or sel down switch.

Push the of the sel left/right switch to complete the setting.

When select the ABS1 (RACE) or ABS2 (TRACK)

The following message is displayed.

or

Push and hold the of the sel left/right switch, ABS mode is not changed and display moves to the ABS mode select display. Select the ABS mode again.

Push and hold the of the sel left/right switch, ABS mode is changed to selected the ABS mode and display moves to the upper hierarchy.

Return to the ordinary display or upper hierarchy to complete the setting.

REV INDICATOR

You can change the setting of the shift indicators.

INTERVAL

You can adjust the interval of lighting the shift indicator.

Available setting range: 0 - 500 r/min (rpm)

SHIFT POINT

You can adjust the shift point.

When “FOR EACH GEAR” is selected, the gear position number is displayed, and the shift point can be selected for each gear.

Available setting range: 5,000 - 16,500 r/min (rpm)

BRIGHTNESS

You can adjust the shift indicator brightness.

Available setting range: OFF or 1 - 8

When “OFF” is selected, the shift indicator is deactivated.

Select the “INTERVAL”, “SHIFT POINT”, or “BRIGHTNESS” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

Return to the ordinary display or upper hierarchy to complete the setting.

Information of the Shift Indicator:

START MODE REV

You can change the engine revolutions when using the start mode.

To use the start mode:

Available setting range: OFF or 6,000 - 9,000 r/min (rpm)

Select the engine revolutions using the sel up or sel down switch.

Return to the ordinary display or upper hierarchy to complete the setting.

You can also complete the setting by pressing the of the sel left/right switch.

DISPLAY CUSTOMIZE

You can register 3 patterns of display settings and use them as ordinary displays.

You can select and combine your favorite styles from “DISPLAY TYPE”, “REV STYLE”, “LAP”, and “INFO” settings.

DISPLAY TYPE	:	You can change the display type.
REV STYLE	:	You can change the tachometer style.
LAP	:	You can switch between STD mode and SPORT mode.
INFO	:	You can change the number of items to be displayed in the information area.

To use a registered display setting as the ordinary display:

Select the desired screen setting from the “01”, “02”, or “03” using the sel up or sel down switch.

Return to the ordinary display or upper hierarchy to complete the setting.

The date appears when you register the display settings or use the registered screen as an ordinary display.

To edit and register the display:

Select the desired screen setting from the “01”, “02”, or “03” using the sel up or sel down switch.

Select the “EDIT” according to the switch operation guide.

Select the “DISPLAY TYPE”, “REV STYLE”, “LAP”, or “INFO” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

You can check the current display settings with thumbnail.

To switch to the SPORT mode, select the “ON” from the “LAP” menu.

Return to the ordinary display or upper hierarchy to complete the setting.

The date appears when you register the display settings or use the registered screen as an ordinary display.

Thumbnail

To edit the display name:

You can edit the display name with up to 10 characters.

Select the “EDIT” according to the switch operation guide.

Push and hold the of the sel left/right switch.

Edit the display name.

To select the character using the sel up switch, sel down switch, and sel left/right switch.

To set the character using the MODE switch.

Select the “OK”, and then press the MODE switch.

Display name

MECHANIC

Displays the current information of the vehicle.

Displays the following information:

Tachometer

Gear position

Throttle grip position

Coolant temperature

Battery voltage

Tachometer Gear position Throttle grip position Coolant temperature Battery voltage

BRIGHTNESS

You can adjust the backlight brightness to one of the eight levels or select the auto adjustment.

Automatic brightness control:

The display can become dark when the display is very hot. If it does not restore the original brightness, contact your dealer.

Select the backlight brightness using the sel up or sel down switch.

Return to the ordinary display or upper hierarchy to complete the setting.

You can also complete the setting by pressing the of the sel left/right switch.

BACKGROUND

You can change the setting of the background to one of the two categories or select the auto adjustment.

Automatic Background Control:

Select the “AUTO”, “BLACK”, or “WHITE” using the sel up or sel down switch.

Return to the ordinary display or upper hierarchy to complete the setting.

You can also complete the setting by pressing the of the sel left/right switch.

FAVORITE INFORMATION

You can change the types of information displayed in “INFO1”, “INFO2”, and “INFO3” of the INFO area.

If the number of items to be displayed on the INFO area is set to “NONE”, “FAVORITE INFORMATION” cannot be usable.

Select the “INFO1”, “INFO2”, or “INFO3” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

If you select the item that is already selected in another area, the previously selected item will automatically turn the “BLANK”.

Return to the ordinary display or upper hierarchy to complete the setting.

The number of items displayed on the INFO area changes according to the “DISPLAY CUSTOMIZE” setting.

Or

USER LETTER

You can edit the USER LETTER with up to 10 characters.

Select the “USER LETTER”.

Edit the USER LETTER.

To select the character using the sel up switch, sel down switch, and sel left/right switch.

To set the character using the MODE switch.

Select the “OK”, and then press the MODE switch.

LAP DATA

You can check and clear the recorded lap data.

If there is no lap data, “LAP DATA” cannot be selected.

To display the other lap information, press the sel up switch or sel down switch.

To use the lap timer:

To clear the recorded lap data:

Push and hold the of the sel left/right switch.

Reset the lap data according to the switch operation guide.

DATE & TIME

Select the “24h or 12h”, “YEAR”, “MONTH / DAY”, “HOUR / MINUTE”, or “am / pm” using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

When “24 / 12” is set to 24-hour indication, “am / pm” cannot be usable.

Return to the ordinary display or upper hierarchy to complete the setting.

UNIT

You can change the speed and mileage, and fuel mileage meter units.

Select the “SPEED” or “FUEL CONS.” using the sel up or sel down switch.

“TEMP” is displayed but not usable.

Select to the desired setting according to the switch operation guide.

Return to the ordinary display or upper hierarchy to complete the setting.

If you want to select “L/100km” or “km/L” for fuel consumption, “km/h” must be selected in the “SPEED” menu in advance.

When “mph” for speed is selected, “mile/gal” or “mile/L” can be selected.

LANGUAGE

Changes the system language.

Select the language using the sel up or sel down switch.

Return to the ordinary display or upper hierarchy to complete the setting.

You can also complete the setting by pressing the of the sel left/right switch.

RESTORE DEFAULT

The set values can be returned to the default settings.

Reset the settings according to the switch operation guide.

The following items are restored to their default values:

CBR1000SP
QUICK SHIFTER

CBR1000SP
PRELOAD GUIDE

CBR1000SP
SUSPENSION M MODE

LAP DATA

DISPLAY CUSTOMIZE

REV INDICATOR

BRIGHTNESS

BACKGROUND

USER LETTER

FAVORITE INFORMATION

DATE & TIME

UNIT

START MODE REV

RIDING MODE

STEERING DAMPER

FAVORITE selection

INFO selection page

ABS MODE

LANGUAGE

MAINTENANCE

You can check the next inspection time and change the setting of next inspection.

Next periodic inspection Next engine oil change

To return to the upper level hierarchy, press and hold the MODE switch.

Display range:

DISTANCE:

Next periodic inspection:

-----, 12,875 to -99,999 km
-----, (8,000 to -99,999 mile)

Next engine oil change:

-----, 12,875 to -99,999 km
-----, (8,000 to -99,999 mile)

Pass 0 km (mile): “-” mark is displayed.

DATE:

Month: ---, JAN to DEC
Year: ----,2019 to 2119

When reaching any of the following, the pop-up information is appears in the ordinary display.

“500 km” or “300 mile” from the next periodic inspection.

“100 km” or “60 mile” from the next engine oil change.

One month before the set month.

Maintenance pop-up information

If the "DISTANCE" is not set, “----- ” km or mile is displayed.

If the "DATE" is not set, “---/----” is displayed.

If the "DISTANCE" and "DATE" are not set, the maintenance pop-up information will not be displayed.

Next inspection setting

Select “” (periodic inspection ) or “” (engine oil change) using the sel up or sel down switch.

Select to the desired setting according to the switch operation guide.

If you press and hold the sel up or sel down switch while setting the “DISTANCE”, it will move every 1000.

Available setting range of the DISTANCE:

Periodic inspection

Except II GS type

-----, 100 to 12,000 km (100 to 8,000 mile)

II GS type

-----, 100 to 6,000 km (100 to 4,000 mile)

Engine oil change

-----, 100 to 12,000 km (100 to 8,000 mile)

Return to the ordinary display or upper hierarchy to complete the setting.

EQUIPMENT

“EQUIPMENT” is displayed but not selectable.

QS INITIALIZE

“QS INITIALIZE” is displayed but not selectable.

DTC

Displays a current problem with the vehicle.

If your vehicle has problem, DTC index is displayed.

Reduce speed and have your vehicle inspected by your dealer as soon as possible.

DTC indexes

RACE KIT ECU USE HISTORY

“RACE KIT ECU USE HISTORY” is displayed but not usable.

Recommended topic(s)
Instruments
Start Mode
Adjusting the ÖHLINS Smart EC System