Riding mode

You can change the riding mode.

The riding mode consists of the following parameters.

The level of each parameter changes according to the selected riding mode.

P: Engine power output level

EB: Engine brake level

D: DCT mode

T: Torque control level

Riding mode has 5 modes.

Available riding modes: [STANDARD], [RAIN], [USER 1], [USER 2] and [SPORT]

STANDARD : Standard, all-round mode for a variety of situations.

RAIN : Good for stable riding on slippery surfaces such as rainy conditions.

SPORT : This mode is suitable for sports riding. You can feel the higher engine response compared to STANDARD.

Each initial setting level cannot be changed.

USER 1 and USER 2

Each initial setting level can be changed.

Initial setting
	P level	EB level	D level	T level
SPORT	3	3	4	1
STANDARD	2	2	2	2
RAIN	1	1	1	3
USER 1	2*1	2*1	2*1	2*1, 2
USER 2	2*1	2*1	2*1	2*1, 2

Notes:

*1 : Level can be changed.

*2 : If off is selected, the level will change to 2 the next time the ignition is turned on.

P level (Engine power output level)

P level has three setting levels.

Available setting range: 1 to 3

Level 1 has the least power.

Level 3 has the most power.

EB level (Engine brake level)

EB level has three setting levels.

Available setting range: 1 to 3

Level 1 has the weakest engine braking effect.

Level 3 has the strongest engine braking effect.

D level (DCT mode)

D level (DCT mode) has four setting levels.

Available setting range: 1 to 4

Higher engine revolution can be used by increasing the level.

Level 1 has the lowest engine revolution.

Level 4 has the highest engine revolution.

T level (Torque control level)

T level has three setting levels or can be turned off.

Available setting range: 1 to 3, or Off

Level 1 is the minimum Torque Control level.

Level 3 is the maximum Torque Control level.

Off deactivates the Torque Control.

If the electrical system is turned from off to on while the T level is set to Off, the T level is automatically set to 2.

Selecting the riding mode

Stop the vehicle.

Press the MODE switch with the throttle fully closed.

Each time the electrical system is turned on the riding mode returns to STANDARD.

MODE switch

Press the MODE switch SPORT STANDARD RAIN USER 1 USER 2

Setting the riding mode

You can change the P, EB, D and T levels on the USER of the riding mode.

Stop the vehicle.

Select the USER 1 or USER 2 riding mode.

Press and hold the MODE button until the parameter setting is displayed in the selectable area.

Parameter setting

Select the desired parameter and setting level.

To select the parameter, push the sel switch in the direction of or .

Press on the sel switch to select the setting level using or on the sel switch.

T level can be changed to 0 (off) by pressing and holding on the sel switch while selecting the T parameter.

To change between the AT MODE and MT MODE.

You can also change the levels on the USER of the riding mode in the setting mode of the instruments.

Push the sel switch in the direction of Push the sel switch in the direction of Press on the sel switch Press on the sel switch Press and hold the MODE switch Press and hold on the sel switch

Recommended topic(s)
Setting mode
Switches
Shifting Gears