Instruments
II ED, II TH, II V type
You can change the speed and mileage meter unit.
Do not operate the display functions for a long time with the motor inactivated. It may result in a low (or dead) 12 V battery.
If more than 7 days have passed since the power switch was turned off or if the 12V battery was removed, it will take some time for the display to appear.
|
|
Total distance ridden.
When “------” is displayed, go to your dealer for service.
When the power limit is about to be applied, the power limitation indicator flashes and comes on when the power is limited.
When the indicator lights on an upslope
When the indicator lights on below 0 °C
Comes on when the system is fail.
Comes on when the battery for motor is very cold.
Comes on when driving is possible and when you are driving.
|
|
Use the and
on the 4-way key/
switch () to select between the home, navigation system, and trip meter.
PUSH START indicator
Flashes if the motor can activate when the power switch is in the (On) position.
When the PUSH START indicator does not flash
READY indicator
Comes on when driving is possible and when you are driving.
At 0 km/h or higher, the READY Indicator turns off.
Available driving distance (Range)
Displays the estimated distance you can travel on the remaining charge for the batteries for motor. The indicated available driving distance is calculated based on the driving conditions and may not always be the actual available driving distance. Also, indicated available driving distance may differ significantly from the actual value depending on the slope of the road, loading conditions, temperature, and driving mode.
Display range: 99 to 0 km (62 to 0 mile).
When “--” is displayed, go to your dealer for service.
Battery for motor gauge (bar/number)
The remaining charge for the batteries for motor appears.
The remaining charge indicates the charge in whichever of the batteries is the lowest, either the front battery for motor or the rear battery for motor.
How the bar and number in the battery for motor gauge decrease differs depending on the operating environment and how you drive. When they decrease, you must charge your vehicle.
Battery for motor gauge number
Battery for motor gauge bar
In the following cases, pop-up information appears.
When malfunction is detected.
When there is update.
When there is other notice.
Press of the 4-way key/
switch to view detailed pop-up information.
|
Recommended topic(s) |
|---|
|
|
|
|