Honda RoadSync Duo

II ED, II TH, II V type

By connecting your smartphone to both a Bluetooth^® headset and the vehicle via Bluetooth^®, you can use voice features for the navigation system, audio, and phone calls.

Furthermore, by connecting the vehicle to the internet via Wi-Fi, you can update the vehicle's software.

To use the system, you need to install the dedicated application on your smartphone beforehand and pair your smartphone with the vehicle and the headset.

For details on each function, see the duo guide.

For terms of service and information on how to install/operate the dedicated application, see the following URL:

https://global.honda/en/roadsync-duo/

The dedicated application is not available in some regions/countries.

For available countries, see the above URL.

Communication range:

Within 1 meters radius from vehicle

Supported Bluetooth^® version/profiles

Bluetooth® version

Bluetooth 4.2 or higher

Bluetooth^® Wireless Technology

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license.

Other trademarks and trade names are those of their respective owners.

Supported Wi-Fi standard

IEEE	802.11 b/g/n (2.4 GHz)

Wi-Fi

The Wi-Fi word mark and logos are registered trademarks owned by Wi-Fi alliance and any use of such marks by Honda Motors Co., Ltd., is under license.

Other trademarks and trade names are those of their respective owners.

Costs of network communication and communication equipment necessary for the use of this feature shall be borne by the user.

You cannot pair two or more smartphones at once.

Some smartphones may not be compatible with the feature.

We shall not be liable for any damages or trouble in the use of smartphones.

When unable to connect your smartphone to the vehicle, change the storage location of the smartphone.

The system itself has certain limitations.

Therefore, you must verify the voice guidance and information in the meter provided by the system by carefully observing the roadway, signs, and signals, etc. If you are unsure, proceed with caution. Always use your own good judgement, and obey traffic laws while riding.

3WARNING
Using the Honda RoadSync Duo while riding can take your attention away from the road, causing a crash in which you could be seriously injured or killed. Do not operate the display while staring at it during riding. Be especially cautions when crossing intersections, in heavy traffic, etc. Carefully observe the roadway, signs, and signals. Obey traffic laws while riding.

When operating the navigation system, please stop the vehicle in a safe place.

Due to traffic information, road construction or closures, detours, or outdated maps, an inappropriate route may be suggested.

Pay attention to actual road signs and signals and verify route guidance information with the understanding that the system has limitations.

Always use your own good judgement, and obey traffic laws while riding.

The contents of this owner’s manual may not match your actual vehicle due to updates or changes in the vehicle or navigation system.

Honda RoadSync Duo Limitations

Changes in operating systems, hardware, software, and other technology integral to providing Honda RoadSync Duo functionality, as well as new or revised governmental regulations, may result in a decrease or cessation of Honda RoadSync Duo functionality and services without notice.

Honda cannot and does not provide any warranty or guarantee of operating systems, hardware, software, and other technology integral to providing Honda RoadSync Duo functionality.

Pairing your smartphone via Bluetooth^®

Make a Bluetooth^® pairing after stopping your vehicle at a safe place.

Confirm your smartphone has the dedicated application.

Only one smartphone can be connected at the same time.

To connect other smartphone, disconnect the Bluetooth^® pairing.

If the 12 V battery is low on charge, charge it before pairing.

Push the “Menu down” switch until setting mode is displayed.

Select the “Bluetooth” by the 4-way key/switch.

Select “Pair new phone” by the 4-way key/switch.

Select “I have the app” by the 4-way key/switch.

Read the QR code with the smartphone application.

For operation of the application, follow the instruction of the application.

Confirm that displayed number on your smartphone and meter are matched and press “Pair.”

Follow the instruction of the application, finish pairing.

When pairing is complete, “Paring Complete” will be displayed.

If you failed to pair, “Couldn't find device” will be displayed, and then the pairing standby state ends.

Perform b to f again.

Disconnecting your smartphone via Bluetooth^® and forgetting pairing record

Make disconnect/forget operation after stopping your vehicle at a safe place.

Push the “Menu down” switch until setting mode is displayed.

Select the “Bluetooth” by the 4-way key/switch.

Select connected smartphone from “Devices” by the 4-way key/switch.

Select the “Disconnect” or “Forget this device” by the 4-way key/switch.

If you select “Disconnect,” connection between the smartphone and vehicle is disconnected.

If you select “Forget this device,” smartphone pairing record is deleted.

Connecting your smartphone via Wi-Fi

Connect your smartphone after stopping your vehicle at a safe place.

If the 12 V battery is low on charge, charge it before connecting.

Push the “Menu down” switch until setting mode is displayed.

Select the “Wi-Fi” by the 4-way key/switch.

Turn on “Wi-Fi” by the 4-way key/switch.

Network searching starts.

Turn on the personal hotspot on your smartphone.

Select network you want to connect by the 4-way key/switch.

Select “Connect” by the 4-way key/switch.

Input password by the displayed keyboard using the 4-way key/switch.

When you complete inputting, it displays a message indicating that the connection is in progress.

When smartphone is connected, it displays “Connected.”

If it failed to connect, perform d to f again.

Disconnecting from Wi-Fi

Make disconnect operation after stopping your vehicle at a safe place.

Push the “Menu down” switch until setting mode is displayed.

Select the “Wi-Fi” by the 4-way key/switch.

Turn off “Wi-Fi.”

Forgetting Wi-Fi connection record

Make disconnect/forget operation after stopping your vehicle at a safe place.

Push the “Menu down” switch until setting mode is displayed.

Select the “Wi-Fi” by the 4-way key/switch.

Select connected network from “Networks” by the 4-way key/switch.

Select the “Forget this Network” by the switch.

Network connection record is deleted.

Software Updates

“1 Update” is displayed in Pop-up area when vehicle receives information about software update.

Update software after stopping at a safe place.

If the 12 V battery is low on charge, charge it before updating.

1 Update

Connect internet via Wi-Fi.

Activate the motor.

Press “Down action” switch to display detailed Pop-up information.

Press the switch to display update contents.

Press the 4-way key/switch to start download.

If you select “Explore New Features,” it displays detailed Pop-up information.

If you turn the power switch to (Off) position, download will be interrupted or cancelled.

Download resume when you turn the power switch to (On) position.

Depending on the download status, it may start from beginning.

Download does not proceed while the power switch is (Off) position.

Press the 4-way key/switch to start install.

If you turn the power switch to (Off) position, install will be interrupted or cancelled.

Download resume when you turn the power switch to (On) position.

Depending on the install status, it may start from beginning.

Install does not proceed while the power switch is (Off) position.

When install is finished, display automatically changes to ordinary display.

Press the switch to reboot the vehicle.

Recommended topic(s)
Switches
INFO area
12 V Battery