EM1 e:

Instruments

Backlight brightness adjustment:

You can adjust the brightness to one of five levels.

  • Turn the power switch to the (On) position.
  • Display the odometer.
  • Press and hold the SEL switch, the brightness adjustment display starts flashing.
  • Press the SEL switch. The brightness is switched.
  • Press and hold the SEL switch. The backlight is set, and then the display moves to the changing of speed and mileage unit.

    • Press SEL switch


    Changing of speed and mileage unit:

  • Press the SEL switch to select either “km/h” and “km” or “mph” and “mile.”
  • Press and hold the SEL switch.

    • The speed and mileage unit are set, and then the display returns to the ordinary display.

    The established setting can also be set by turning the power switch to the (Off) position.


    The control is automatically switched from the setting mode to the ordinary display if the switch is not pressed for about 30 seconds. Even in this case, established setting is maintained.

    Recommended topic(s)

  • Electric Vehicle Does Not Drive
  • Activating the Motor
  • Battery for Motor