AFRICA TWIN

Instruments

Setting mode

To Shift to the Menu of the Multi-Information Display

Pull backward and hold the page switch or touch the clock area of the multi-information display.

Press the sel up switch.

Press the sel down switch.

Select [Riding Information], and then press the ENT switch or touch the [Riding Information] of the multi-information display.

Pull backward the page switch.

Riding Information

Media

Phone

Settings

Home screen

Riding information

Press the sel down switch.

Press the sel up switch.

Press the back switch or touch the of the multi-information display.

Press the ENT switch.

Settings

User Modes

-Trip

Auto Cancel Turn Signal

HISS indicator

Function

Favourite Switch

Display Mode

Brightness

Background

Favourite Information

Display

Settings

Restore Default Settings

Date and Time

Units

Volume

Language

General

Settings

Equipment

System Information

Service mode

Initialise

DTC

Maintenance

Service

Settings

Connected Services

Bluetooth

Regulatory

Function

Following items can be changed sequentially.

  • User Modes (this page)
  • -Trip
  • Auto Cancel Turn Signal
  • HISS indicator


    • User Modes

    You can change the [Power], [Engine Brake], [Overall]*1, [Front]*1, [Rear]*1, [ABS], [Preload]*1 values in [USER 1 MODE] and [USER 2 MODE].

    *1 : CRF1100A3/A4/D3/D4/DL4

  • Select [User Modes], and then press the ENT switch.
  • Select [User 1] or [User 2] using the sel up or sel down switch, and then press the ENT switch.
  • Press the sel up switch or sel down switch to select a setting menu.
  • Push the or of the sel left/right switch until the desired value is displayed.
  • Push and hold the or of the sel left/right switch to advance the figure fast.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings:

    Default:


    -Trip

    You can also adjust value of the subtraction trip [-TRIP].

  • Select [-Trip], and then press the ENT switch.
  • Select the digits using the or of the sel left/right switch.
  • To increase value: Press the sel up switch, until the desired value is displayed.

    • To decrease value: Press the sel down switch, until the desired value is displayed.

  • Press and hold the sel up switch or sel down switch to advance the figure fast.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Setting range: 000 to 999

    Default: 000


    Auto Cancel Turn Signal

    You can enable/disable turn signal automatic cancellation.

  • Select [Auto Cancel Turn Signal], and then press the ENT switch to [ON] (enable) or [OFF] (disable) the function.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings: [ON]/[OFF]

    Default: [ON]


    HISS Indicator

    You can select the blink or off the HISS indicator.

  • Select [HISS Indicator], and then press the ENT switch to select [ON] (blink) or [OFF] (off) the function.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings: [ON]/[OFF]

    Default: [ON]

    Display

    Following items can be changed sequentially.

  • Display Mode (this page)
  • Brightness
  • Background
  • Favourite Information
  • Favourite Switch


    • Display Mode

    You can select the riding information image.

  • Select [Display Mode], and then press the ENT switch.
  • Press the sel up switch or sel down switch to select a setting menu.
  • Push the or of the sel left/right switch to select your desired display.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.

    Available settings: Gold image/Silver image/Bronze image

    Default:

  • [TOUR MODE]: Gold image
  • [URBAN MODE]: Silver image
  • [GRAVEL MODE]: Silver image
  • [OFF ROAD MODE]: Bronze image
  • [USER 1 MODE]: Silver image
  • [USER 2 MODE]: Bronze image


    • Brightness

    You can select the backlight brightness.


    The display can become dark when the display is very hot. If it does not restore the original brightness, contact your dealer.


    Automatic Brightness Control:

  • Select [Brightness], and then press the ENT switch.
  • Select [Auto], and then press the ENT switch to [ON] (auto) or [OFF] (manual) the function.
  • If you select to [OFF] (manual) push the or of the sel left/right switch to select your preferred level.
  • Push and hold the or of the sel left/right switch to advance the figure fast.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Setting range: Level 1 to 8 or [Auto]

    Default: [Auto]


    Background

    You can select the background.


    Automatic Background Control:


  • Select [Background], and then press the ENT switch.
  • Select [Auto], and then press the ENT switch to [ON] (auto) or [OFF] (manual) the function.
  • If you select to [ON] (auto), push the or of the sel left/right switch to select your preferred level.
  • Push and hold the or of the sel left/right switch to advance the figure fast.

    • If you select to [OFF] (manual), press the sel up switch or sel down switch to select the [White] or [Black].

  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Setting range: Auto Level 1 to 7, White or Black

    Default: Auto 1


    Favourite Information

    You can select the following:

  • Page 1
  • Tripmeter A average fuel mileage [AVG. CONS.]
  • Tripmeter A average speed [AVG. SPD.]
  • Tripmeter A current fuel mileage [CONS.]
  • Tripmeter A elapsed [ELAPSED]
  • Tripmeter B [TRIP B]
  • Blank
  • Page 2
  • Tripmeter B average fuel mileage [AVG. CONS.]
  • Tripmeter B average speed [AVG. SPD.]
  • Tripmeter B current fuel mileage [CONS.]
  • Tripmeter B elapsed [ELAPSED]
  • Blank
  • Page 3
  • Current fuel mileage [INST. CONS.]
  • Available driving distance [RANGE]
  • Battery voltage [VOLTAGE]
  • Date [DATE]
  • Average fuel mileage [AVG. CONS.]
  • Fuel consumption [CONS.]
  • Elapsed time [ELAPSED]
  • Subtraction trip [-TRIP]
  • Blank
  • Select [Favourite Information], and then press the ENT switch.
  • Push the or of the sel left/right switch until the desired page is displayed.
  • Press / to select the available choices, and then press the ENT switch.
  • Press / to select the available choices, and then press the ENT switch.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Default:

  • Page 1
  • Tripmeter A average fuel mileage [AVG. CONS.]
  • Tripmeter A average speed [AVG. SPD.]
  • Tripmeter A current fuel mileage [CONS.]
  • Page 2
  • Tripmeter B average fuel mileage [AVG. CONS.]
  • Tripmeter B average speed [AVG. SPD.]
  • Tripmeter B current fuel mileage [CONS.]
  • Page 3
  • Current fuel mileage [INST. CONS.]
  • Available driving distance [RANGE]
  • Battery voltage [VOLTAGE]
  • Date [DATE]


    • Favourite Switch

  • Select [Favourite Switch], and then press the ENT switch.
  • Press the sel up switch or sel down switch to select your desired mode.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings: [HSTC]/
    [Wheelie Control]/[Riding Mode]/
    [G Switch] CRF1100D/D3/D4/DL4

    Default: [HSTC]

    General

    Following items can be changed sequentially.

  • Date and Time (this page)
  • Units
  • Volume
  • Language
  • Restore Default Settings


    • Date and Time

    The multi-information display receives signals from GPS satellites and updates the date and time automatically.

    You can also adjust the date and time manually.

    To [ON] (auto) adjust time automatically function:

  • Select [Date and Time], and then press the ENT switch.
  • Select [Adjust Time Automatically], and then press the ENT switch to [ON] (auto) the function.

    • When GPS cannot be located. Read the notice message, and then press the ENT switch.

  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    To adjust the clock manually:

  • Select [Date and Time], and then press the ENT switch.
  • Select [Adjust Time Automatically], and then press the ENT switch to [OFF] (manual) the function.
  • Press / on the sel left/right switch to select a day, month, year, hour, minute or time format section.
  • To advance the day, month, year, hour or minute: Press the sel up switch until the desired value is displayed.
    To delay the day, month, year, hour or minute: Press the sel down switch until the desired value is displayed.
  • Press and hold the sel up switch or sel down switch to advance the figure fast.
  • To select the time format: Press the sel up switch or sel down switch until the desired time format is displayed.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings: [ON] (auto)/[OFF] (manual)

    Default: [ON] (auto)


    Units

    You can change the following units.

  • [Speed]: [km/h] or [mph]
  • [Fuel Consumption]: [l/100 km] or [km/l]
    If the [mph] for speed is selected, the fuel mileage shown by [mpg] or [mile/L].
  • Select [Units], and then press the ENT switch.
  • Press the sel up switch or sel down switch to select a setting menu.
  • "Temperature" is displayed but not usable.
  • Push the or of the sel left/right switch to select your desired unit.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings:

  • [Speed]: [km/h]/[mph]
  • [Fuel Consumption]: [l/100 km]/[km/l]/[mpg]/[mile/L]

    • Default:

  • [Speed]: [km/h]
  • [Fuel Consumption]: [l/100 km]


    • Volume

    Selects the volume setting to automatically increase volume from the headsets as the speed of the vehicle increases.

    To [Off] (disable), [Low] or [High] automatic volume function:

  • Select [Volume], and then press the ENT switch.
  • Select [Automatic Volume], and then press the ENT switch.
  • Press the sel up switch or sel down switch to set your selection.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Available settings: [Off] (disable)/[Low]/[High]

    Default: [Off] (disable)


    To adjust the volume:

  • Select [Volume], and then press the ENT switch.
  • Press the sel up switch or sel down switch to select a setting menu.
  • Push the or of the sel left/right switch to select your preferred level.
  • Push and hold the or of the sel left/right switch to advance the figure fast.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    VOLUME level range:

    Other than Microphone: Level 0 to 30

    Microphone: Level 0 to 14

    Default:

  • Music (Rider): 7
  • Music (Passenger): 7
  • Phone: 7
  • System: 7
  • Ringtone: 7
  • Voice: 7
  • CarPlay: 7
  • Android AutoTM: 7
  • Microphone: 7


    • Language

    Changes the system language.

  • Select [Language], and then press the ENT switch.
  • Press the sel up switch or sel down switch to select the display language that you want to use on the screen.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Default:
    ED, II ED, III ED type [UK English]
    GS, II GS, III GS type [US English]


    Restore Default Settings

    The set values can be returned to default settings.

  • Select [Restore Default Settings], and then press the ENT switch.
  • Select [No] (not restore) or [Yes] (restore) using the sel up or sel down switch.
  • When [No] is selected
    Press the ENT switch.
    The set value is maintained, and then the display returns to the [General] menu screen.
    When [Yes] is selected
    Press the ENT switch.
    The display changes to the confirmation screen.
  • Select [No] (not restore) or [Yes] (restore) using the sel up or sel down switch on the confirmation screen.
  • When [No] is selected
    Press the ENT switch.
    The set value is maintained, and then the display returns to the [General] menu screen.
    When [Yes] is selected
    Press the ENT switch.
    The set value return to default setting, and then the display returns to the [General] menu screen.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Default setting values:

  • -TRIP: 000
  • Display mode:
  • [TOUR MODE]: Gold image
  • [URBAN MODE]: Silver image
  • [GRAVEL MODE]: Silver image
  • [OFF ROAD MODE]: Bronze image
  • [USER 1 MODE]: Silver image
  • [USER 2 MODE]: Bronze image
  • Brightness: Auto
  • Background: Auto 1
  • Favourite information:
  • Page 1:
  • Tripmeter A average fuel mileage [AVG. CONS.]
  • Tripmeter A average speed [AVG. SPD.]
  • Tripmeter A current fuel mileage [CONS.]
  • Page 2:
  • Tripmeter B average fuel mileage [AVG. CONS.]
  • Tripmeter B average speed [AVG. SPD.]
  • Tripmeter B current fuel mileage [CONS.]
  • Page 3:
  • Current fuel mileage [INST. CONS.]
  • Available driving distance [RANGE]
  • Battery voltage [VOLTAGE]
  • Date [DATE]
  • Favourite switch: [HSTC]
  • Automatic Volume: [OFF]
  • Periodic Maintenance:
  • Distance: "-----"
  • Date: "----/---"
  • Oil Change:
  • Distance: "-----"
  • Date: "----/---"
  • Delete the Bluetooth® paired device


    • Service

    Following items can be changed sequentially.

  • Maintenance
  • DTC
  • Initialise
  • Service mode
  • Equipment
  • System Information


    • Maintenance

    You can check the next periodic inspection time and next engine oil change.

    You can change the setting of the next periodic inspection and next engine oil change.

  • Select [Maintenance], and then press the ENT switch.
  • Press the sel up switch or sel down switch to select a setting menu, and then press the ENT switch.
  • Press or of the sel left/right switch to select a distance, month or year section.
  • To advance the distance, month or year: Press the sel up switch until the desired value is displayed.
    To delay the distance, month or year: Press the sel down switch until the desired value is displayed.
  • Press and hold the sel up switch or sel down switch to advance the figure fast.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Setting range:

  • Periodic Maintenance:
  • Distance: 100 to 12,000 km or 100 to 8,000 mile
  • Date: 2000/JAN to 2099/DEC
  • Oil Change:
  • Distance: 100 to 12,000 km or 100 to 8,000 mile
  • Date: 2000/JAN to 2099/DEC

    • Default:

  • Periodic Maintenance:
  • Distance: "-----"
  • Date: "----/---"
  • Oil Change:
  • Distance: "-----"
  • Date: "----/---"


    • DTC

    You can check for a current problem with the PGM-FI system.

    If your vehicle has problem, DTC index is displayed.

    Reduce speed and have your vehicle inspected by your dealer as soon as possible.

  • Select [DTC], and then press the ENT switch.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Initialise

    You can calibrate of the touch screen.

  • Select [Initialise], and then press the ENT switch.
  • Select [Touchscreen Calibration], and then press the ENT switch.
  • Touch the centre on each of the four crosses.
  • The screen flashes green when calibration is complete.

    • If calibration fails, the screen flashes red. Try step c again.

  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Service Mode

    The DRL and cornering light (CRF1100A4/D4/DL4) can be turned on when the vehicle is stopped for inspection.

  • Start the engine.
  • Stop the vehicle.
  • Select [Service Mode], and then press the ENT switch.
  • CRF1100A4/D4/DL4
    Press the sel up switch or sel down switch to select a menu.
  • Press the ENT switch.

    • The light of the selected menu lights up.

  • The service mode will automatically stop in 5 minutes.
  • Return to the riding information, previous screen or Home screen.

    • You can also perform the above settings by using the touch screen.


    Equipment

    This menu cannot be selected.


    System Information

    Shows various information of the multi-information display.

  • [Software Version]
  • [Software update]: Cannot be selected.
  • [Hardware Information]
  • [GPS Reception Status]
  • [EULAs]
  • [Copyright and Acknowledgements]

    • Regulatory

    Shows regulatory information of the multi-information display.

    Recommended topic(s)

  • Bluetooth® Audio
  • G switch
  • Wheelie Control