Audio System

Bluetooth® Audio

Bluetooth® Setting

You can connect with your Bluetooth® audio device (mobile phone, digital audio player or equivalents) and Bluetooth® headsets via Bluetooth®.

Available devices are as follows:

[Phone Pairing] (For Bluetooth® audio device)

[Headset Pairing] (For rider headset and passenger headset)

Supported Bluetooth® version/profiles

Bluetooth® version	Bluetooth 2.1 + EDR
Bluetooth® profiles (For iPhone, AndroidTM phone, mobile phone or Bluetooth® device)	HFP (Hand Free Profile) ver. 1.5
	A2DP (Advanced Audio Distribution Profile) ver. 1.2
	AVRCP (Audio/Video Remote Control Profile) ver. 1.4
	PBAP (Phone Book Access Profile) ver. 1.0
Bluetooth® profiles (For rider and passenger headsets)	HFP (Hand Free Profile) ver. 1.7
	A2DP (Advanced Audio Distribution Profile) ver. 1.2

You cannot pair a Bluetooth® device and Bluetooth® headsets while the vehicle is moving. When pairing, park your vehicle in a safe place.

Bluetooth® connection cannot be established while launching Apple CarPlay.

Your vehicle is not equipped with an intercom function. If you want to use the intercom function, use the intercom function of your headset.

Some local governments prohibit the use of a headset by the operator of a motor vehicle. Always obey applicable laws and regulations.

Phone Pairing

You can establish a Bluetooth® connection in two ways.

[Visible]: Search from the device.

[Phone Pairing]: Search from the system.

This function is disabled while the vehicle is in motion.

Enable the Bluetooth® function on your device.

For details, refer to the instruction manual of your device.

[Visible]

Tap “Honda Motorcycle #*****” on the Bluetooth® setting menu of the target device.

The part of ***** is different letter for each vehicle.

When a request message appears on the target device, tap “Pair.”

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

[Phone Pairing]

Select [Phone Pairing], and then press the ENT switch.

The names of the detected device are displayed.

If many Bluetooth® devices are detected, the target device may be detected under the list, scroll down the list.

When a request message appears on the target device, tap “Pair.”

When the pairing is complete, the name of the paired device are displayed.

Icon status:

	: Phone function connected
	: Music function connected

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

To disconnect the phone:

Headset Pairing

This function is disabled while the vehicle is in motion.

Enable the Bluetooth® function on your device.

For details, refer to the instruction manual of your device.

The names of the detected device are displayed.

If many Bluetooth® devices are detected, the target device may be detected under the list, scroll down the list.

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

To disconnect the headset:

To Reconnect a Paired Device Automatically

When the ignition switch is turned (On) position, the system reconnects with registered devices automatically.

If the system finds multiple paired devices, the system will reconnect with the device that was connected last.

After reconnecting, the song that was last played will be played automatically.

To Connect/Disconnect Available Functions Individually

Depending on the connected device, this function may not be able to establish a connection.

To connect functions:

[Phone Pairing]

Select [Phone Pairing], and then press the ENT switch to enter the setting menu.

Select the paired device, and then press the ENT switch.

Select [Connect a Phone] or [Connect Music], and then press the ENT switch to [ON] (enable) the function.

[Headset Pairing]

Select [Headset Pairing], and then press the ENT switch to enter the setting menu.

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

To disconnect functions:

[Phone Pairing]

Select [Phone Pairing], and then press the ENT switch to enter the setting menu.

Select [Connect a Phone] or [Connect Music], and then press the ENT switch to [OFF] (disable) the function.

[Headset Pairing]

Select [Headset Pairing], and then press the ENT switch to enter the setting menu.

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

To Delete Connected Device

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

Playing Audio

The audio system can play music stored on a device connected via Bluetooth®.

[3] Album title [4] Play time [2] Artist name [5] Progress bar [6] Total time [1] Song title

Screen Information

The information displayed on the screen differs depending on the connected device and the type of file being played back.

The system supports ID3 tag information. If a track does not have an ID3 tag, the song title or file name is displayed.

[1] Song title

[2] Artist name

[3] Album title (Folder name)

[4] Play time

[5] Progress bar

[6] Total time

To Play a Track

Connect the device you want to play from.

Bluetooth® setting:

Select [Media], and then press the ENT switch.

Select , and then press the ENT switch.

Return to the riding information, previous screen or Home screen.

You can also perform the above settings by using the touch screen.

To Pause a Track

Select , and then press the ENT switch.

You can also perform the above settings by using the touch screen.

To Change a Track

To skip to the next song: Press the skip switch.

To move rapidly within a track: Press and hold the skip switch.

To go back to the beginning of the current or previous song: Press the goes back switch.

To move rapidly within a track: Press and hold the goes back switch.

You can also perform the above settings by using the touch screen.

To Select the Play Mode

You can select repeat and random modes.

The audio play mode status icon or colour of the audio play mode status icon changes.

Audio play mode status icons

Cycles through the play modes as follows:

Select , and then press the ENT switch.

	(Black) No repeat mode: No repeat.
	(Blue) Album repeat play mode: Repeats all tracks in the current playlist ([Artists], [Albums] or [Songs], etc.).
	(Blue) Track repeat play mode: Repeats the current track.

Select , and then press the ENT switch.

	(Black) Normal play mode: Plays tracks in original order.
	(Blue) Random play mode: Plays tracks randomly.

You can also perform the above settings by using the touch screen.

Recommended topic(s)
Setting mode
Handsfree Calling
Audio System