Electrical Trouble

Blown Fuse

Before handling fuses, see “Inspecting and Replacing Fuses.”

Fuse Box Fuses & ABS FSR Fuse

  • Remove the front seat.
  • Open the fuse box covers.
  • Pull the fuses out with the fuse puller provided on the underside of the rear seat () one by one check for a blown fuse. Always replace a blown fuse with a spare fuse of the same rating.
  • Close the fuse box covers.
  • Reinstall the front seat.
  • Spare fuses

    Fuse box cover

    ABS FSR fuse box cover

    Main Fuse & ABS Main Fuse

    Starter magnetic switch

    Spare fuse

    Main fuse

    Starter magnetic switch cover

    ABS main fuse

  • Remove the battery box cover.
  • Pull the starter magnetic switch out.
  • Remove the starter magnetic switch cover.
  • Pull the main fuse and ABS main fuse out with the fuse puller provided on the underside of the rear seat () one by one check for a blown fuse. Always replace a blown fuse with a spare fuse of the same rating.
  • Spare main fuse and spare ABS main fuse are provided in the starter magnetic switch.
  • Reinstall parts in the reverse order of removal.
  • FI Fuse & Main 2 Fuse

    CRF1100A/A3/A4

    FI fuse

    Main 2 fuse

    Fuse box covers

    FI fuse box and main 2 fuse box suspension

  • Remove the battery box cover.
  • Pull the FI fuse box and main 2 fuse box suspension out.
  • Open the fuse box cover.
  • Pull the FI fuse and main 2 fuse out with the fuse puller provided on the underside of the rear seat () and check for a blown fuse. Always replace a blown fuse with a spare fuse of the same rating.
  • Spare FI fuse is provided in the fuse box under the front seat.
  • Spare main 2 fuse is provided in the starter magnetic switch.
  • Reinstall parts in the reverse order of removal.
  • FI Fuse & Main 2 Fuse & DCT Main Fuse

    CRF1100D/D3/D4/DL4

    DCT main fuse

    FI fuse

    Main 2 fuse

    Fuse box covers

    Main 2 fuse/FI main fuse box and DCT fuse box suspension

  • Remove the battery box cover.
  • Pull the main 2 fuse/FI main fuse box and DCT fuse box suspension out.
  • Open the fuse box covers.
  • Pull the FI fuse, main 2 fuse and DCT main fuse out with the fuse puller provided on the underside of the rear seat () one by one check for a blown fuse. Always replace a blown fuse with a spare fuse of the same rating.
  • Spare FI fuse is provided in the fuse box under the front seat.
  • Spare main 2 fuse and spare DCT main fuse are provided in the starter magnetic switch.
  • Reinstall parts in the reverse order of removal.
  • NOTICE

    If a fuse fails repeatedly, you likely have an electrical problem. Have your vehicle inspected by your dealer.

    Recommended topic(s)

  • Fuses
  • Battery Box Cover
  • Starter Motor Does Not Operate