Honda Selectable Torque Control

Torque Control level (engine power control) can be selected or turned on/off.

Do not change the Torque Control level while riding.
Stop the vehicle first, turn the Torque Control off or on and select the desired level.

The Torque Control setting cannot be changed or turned off when the system is activated (Torque Control indicator flashing).

In the following cases, the Torque Control will be turned on and the specific Torque Control level will automatically be set as below.

Each time the ignition switch is turned to the (On) position, the Torque Control level will automatically be set to level it was set to. However, if the level was set to [0] (off), it will become level 1.

When the Torque Control is turned from the [0] (off) position to the on position, it will automatically be set to level of before turning off the Torque Control.

Torque Control level setting

When using the favourite switch:

Stop the vehicle.

Select the [HSTC] of the favourite switch.

Press the favourite switch.

7: the maximum Torque Control level

1: the minimum Torque Control level

Favourite switch

When using the multi-information display:

Stop the vehicle.

Select the gold image display.

Select page 4.

Press the ENT switch.

Select [HSTC].

Push the or of the sel left/right switch to select your preferred level.

Press the back switch.

You can also perform the above settings by using the touch screen.

Torque Control on and off

Stop the vehicle.

Select the gold image display.

Select page 4.

Press the ENT switch.

Select [HSTC].

Press and hold on the sel left/right switch to set the [0] (off).

Press and hold on the sel left/right switch to set to level of before turning [0] (off) the Torque Control.

Press the back switch.

You can also perform the above settings by using the touch screen.

Setting range: Level 1 to 7 or 0 (Off)

Recommended topic(s)
Wheelie Control
Honda Selectable Torque Control
Setting mode