USB Socket
The USB socket is located in the right side front turn signal light cover (CRF1100A/A3/D/D3) or right side inner panel cover (CRF1100A4/D4/DL4).
Use USB devices at your own risk. In no event shall Honda be liable for any damage to your USB device when in use.
Only USB devices within the following specifications can be connected.
Open the cover to access the socket.
Rated capacity is
7.5 W (5 V, 1.5 A).
To connect your USB device
Open the cover to access the USB socket.
Connect a certified USB cable to the socket.
Route the USB cable along the recess.
Pass the USB cable through the cover slit and close the cover.
USB cable
Cover
Slit
Recess |
To prevent the battery from becoming weak (or dead), keep the engine running while drawing current from the socket.
To prevent entry of foreign matter into the socket, be sure to close the cover.
Carefully secure all connected devices, as vibration may cause damage to them or they could shift unexpectedly.
NOTICE
Using any heat-generating USB devices or improperly rated USB devices can damage the socket.
Do not use the USB socket in wet conditions, when or while washing or any other wet conditions as these will damage the USB socket.
Do not allow the USB cable to become pinched or trapped.
Do not allow the USB cable to interfere with the steering or controls. |
Recommended topic(s) |
---|
Accessory Socket |
Apple CarPlay |
Android Auto™ |