Wheelie Control

Wheelie Control level [W] can be selected or turned on/off.

Do not change the wheelie control level [W] while riding.
Stop the vehicle first, then select the wheelie control level [W].

In the following cases, the wheelie control [W] will be turned on and the specific wheelie control level [W] will automatically be set as below.

Each time the ignition switch is turned to the (On) position, the wheelie control level [W] will automatically be set to level it was set to before. However, if the level was set to 0 (off), it will automatically be set to level before turning off the wheelie control level [W].

When the wheelie control [W] is turned from the [0] (off) position to the on position, it will automatically be set to the level before turning off the wheelie control [W].

Wheelie Control Level setting

When using the favourite switch:

Stop the vehicle.

Select the [Wheelie Control]] of the favourite switch.

Press the favourite switch.

3: the maximum wheelie control level [W]

1: the minimum wheelie control level [W]

Favourite switch

When using the multi-information display:

Stop the vehicle.

Select the gold image display.

Select page 4.

Press the ENT switch.

Select [W].

Push the or of the sel left/right switch to select your preferred level.

Press the back switch.

You can also perform the above settings by using the touch screen.

Wheelie Control on and off

Stop the vehicle.

Select the gold image display.

Select page 4.

Press the ENT switch.

Select [W].

Press and hold on the sel left/right switch to set the [0] (off).

Press and hold on the sel left/right switch to set to level of before turning [0] (off) the wheelie control.

Press the back switch.

You can also perform the above settings by using the touch screen.

Setting range: Level 1 to 3 or 0 (Off)

Recommended topic(s)
Honda Selectable Torque Control
Setting mode
G switch