Switches
|
Switches the electrical system on/off, locks the steering.
Locks steering.
Turns engine off. Turns electrical system on for starting/riding. |
Right handlebar switch
|
Should normally remain in the (Run) position.
Press to display the pop-up information on the multi-information display.
To shift between Neutral and AT MODE.
Push up or down to set the speed or adjust the set speed.
Press to activate the cruise control system.
To shift between the AT MODE and MT MODE.
Left handlebar switch
|
Favourite switch can be assigned to the HSTC switch, wheelie control switch, riding mode switch or G switch CRF1100D/D3/D4/DL4.
Press the sel up switch to select the available choices.
Goes back to the beginning of the current or previous song or to move rapidly within a track.
Press to return to the previous screen.
Skips to the next song or to move rapidly within a track.
Switchable when the ignition switch is turned to the (On) position. Can be turned to off regardless of the ignition switch position.
Press the sel down switch to select the available choices.
The turn signal will automatically stop when you complete the turn. (You can manually cancel the lights by pressing the switch in.) When used for a lane change, the turn signal will automatically stop in 7 seconds or after riding 120 m (131 yards). In some cases, the timing at which the turn signal stops could be less or more. Always use the recommended tyres to ensure correct automatic cancellation operation.
Press the
sel left/right switch in the
/
directions to select the available choices.
|
Recommended topic(s) |
---|
|
|
|