Instruments

INFO area

The INFO area displays various vehicle information.

The following items are displayed by default.

Odometer [TOTAL]

Current electricity consumption [INST. CONS.]

Available riding distance [RANGE]

Tripmeter A [TRIP A]

Tripmeter B [TRIP B]

The information item displayed in the INFO area can be changed arbitrarily.

Up to 9 items are available. (Including Blank)

If no item is selected or only Blank is selected, the INFO area has no items.

To change the information:

The types of information item that can be displayed in the INFO area are as follows:

TOTAL

INST. CONS.

RANGE

TRIP A

AVG. CONS. A

TRIP B

AVG. CONS B.

AVG SPEED

Blank

Odometer [TOTAL]

Total distance ridden.

When “------” is displayed, go to your dealer for service.

Current electricity consumption [INST. CONS.]

Displays the instantaneous electricity consumption.

Display range: 0.0 to 999.9 kWh/100 km (mile/kWh)

When your speed is less than 5 km/h (3 mph): “---.-” is displayed.

Available Riding Distance [RANGE]

Displays the estimated distance you can travel on the remaining charge for the high voltage battery.

The indicated available riding distance is calculated based on the riding conditions and may not always be the actual available riding distance.

Also, indicated available riding distance may differ significantly from the actual value depending on the slope of the road, loading conditions, temperature, and riding mode.

Display range: 999 to 0 km (999 to 0 mile)

Above 999 km (mile): “999” is displayed.

When the high voltage battery SOC (State Of Charge) is less than 20 %: “---” is displayed.

When “---” is displayed except for the above-mentioned cases, go to your dealer for service.

The indicated available riding distance is calculated based on riding conditions, and the indicated figure may not always be the actual allowable distance.

Tripmeter A [TRIP A]

Distance ridden since the tripmeter A was reset.

When “----.-” is displayed, go to your dealer for service.

To reset the tripmeter A:

Tripmeter A average electricity consumption [AVG CONS. A]

Displays the average electricity consumption since the tripmeter A was reset.

The average electricity consumption will be calculated based on the value on tripmeter A.

Display range: 0.0 to 999.9 kWh/100 km (mile/kWh)

Above 999.9 kWh/100 km: “--.-” is displayed.

Above 999.9 mile/kWh: “999.9” is displayed.

When the average electricity consumption is reset: “---.-” is displayed.

When “---.-” is displayed except for the above-mentioned cases, go to your dealer for service.

Tripmeter A average electricity consumption is reset when you reset tripmeter A.

To reset the tripmeter A:

Tripmeter B [TRIP B]

Distance ridden since the tripmeter B was reset.

When “----.-” is displayed, go to your dealer for service.

To reset the tripmeter B:

Tripmeter B average electricity consumption [AVG CONS. B]

Displays the average electricity consumption since the tripmeter B was reset.

The average electricity consumption will be calculated based on the value on tripmeter B.

Display range: 0.0 to 999.9 kWh/100 km (mile/kWh)

Above 299.9 kWh/100 km: “--.-” is displayed.

Above 999.9 mile/kWh: “999.9” is displayed.

When the average electricity consumption is reset: “---.-” is displayed.

When “---.-” is displayed except for the above-mentioned cases, go to your dealer for service.

Tripmeter B average electricity consumption is reset when you reset tripmeter B.

To reset the tripmeter B:

Average speed [AVG SPEED]

Displays the average speed since the motor was activated.

Display range: 0 to 199 km/h (0 to 124 mph)

Initial display: “---” is displayed.

When your vehicle has travelled less than 0.2 km since the motor was activated: “---” is displayed.

When your vehicle operating time is less than 16 seconds since the motor was activated: “---” is displayed.

When “---” is displayed except for the above-mentioned cases, go to your dealer for service.

Blank display

Display the blank.

Selectable area

You can select the following:

General menu

Honda RoadSync transition

Honda RoadSync mute

FAVORITE SWITCH (Trip reset mode or Grip heater mode)

Honda RoadSync transition and Honda RoadSync mute can be selected only when your smartphone is connected to the vehicle.

To connect the device

Honda RoadSync transition Honda RoadSync mute Press and hold the on the sel switch Press on the sel switch Press and hold the on the sel switch Move to Honda RoadSync operation display. Mute audio and sound. General menu Selectable area Press and hold the on the sel switch FAVORITE SWITCH

General Menu

You can select the following:

Status mode

Grip heater mode

Trip reset mode

Setting mode

Status mode

The Status mode displays various vehicle information.

The Status mode has four pages and displays two pieces of information on each page.

Press on the sel switch while select the status mode, display moves to vehicle information page.

The information item displayed in the status mode can be changed arbitrarily.

To change the information:

To switch the information page

To change the information page, press or on the sel switch.

To change the information:

Grip heater mode

Change the handle grip heater level or turns off the handle grip heater.

To change the handle grip heater level:

Trip reset mode

You can reset the tripmeter A or tripmeter B.

Select the trip reset mode.

Press on the sel switch.

Select the A or B by pressing or on the sel switch.

or

Press and hold on the sel switch.
The tripmeter A or B is reset.

Also, the trip meter A is automatically reset when the high voltage battery gauge increases by 35 % or more after recharging and riding your vehicle for 0.1 km (0.06 mile). You can activate or deactivate the automatic reset mode.

Recommended topic(s)
Setting mode
Pop-up information
Instruments