Activating the Electrical System in an Emergency
Set up to ID number input mode
|
ID number |
ID number input
You can input your ID number by pushing the power switch 
(On) switch and turn the power switch knob 
/
(Off/Lock) counterclockwise. Input the ID number on the ID tag in order from the left in turn by pushing the power (On) switch.
The ID number is authenticated according to the number of times the power switch is pushed.
Push the power (On) switch the desired number of times, then turn the power switch knob / (Off/Lock) counterclockwise to fix the current digit (the buzzer sounds and the steering lock indicator goes off briefly and comes on again), and input the next digit, and then repeat until all the digits are input.
Contact your dealer.
While inputting the ID number, if the button is not pressed for about 60 seconds, the inputted ID number is cancelled (the buzzer sounds and the steering lock indicator goes off).
Example:
/ (Off/Lock) counterclockwise without pushing the power (On) switch, and then input next digit.|
To input “0” Power switch knob ID number No push Power |
(On) switch once, and then turn the power switch knob / (Off/Lock) counterclockwise to input the next digit.|
Power switch knob ID number Push one time Power To input “1” |
ID number input success
After the last digit of the ID number is inputted, ID number is authenticated, the steering lock indicator will flash every 2 seconds.
Push the power (On) switch within 30 seconds after the ID number is authenticated.
If the steering is locked
The steering will be unlocked. To active the electrical system, push the power (On) switch once again within 30 seconds after the ID number is authenticated.
If the steering is unlocked
The electrical system will be activated. You can start the motor.
You can turn off the motor and electrical system and also lock the steering using the power switch. The power switch operation is disabled 30 seconds after the electrical system is turned off.
To activate the electrical system again, repeat the procedures for activating the electrical system in an emergency.
ID number input failure
If the ID number is not authenticated after inputting, the buzzer sounds and the steering lock indicator goes off. The steering cannot be unlocked and the electrical system will not activate.
Repeat the procedures for activating the electrical system in an emergency.
ID number input cancel
If you input the wrong number, you can cancel ID number input by not operating the switch for about 60 seconds (the buzzer sounds and the steering lock indicator goes off ).
Repeat the procedures for activating the electrical system in an emergency.
|
Recommended topic(s) |
|---|
|
|
|
|
|
|