Instruments

Setting mode

To shift to the setting mode

Select the general menu.

Select the setting mode.

Press on the sel switch, and then display moves to the setting mode.

Operation while riding is prohibited.

To return to the ordinary display

Press on the sel switch until return to the ordinary display.

Turn the electrical system is off and on again.

Setting flow

HSTC

You can enable or disable the HSTC (Honda Selectable Torque Control).

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

SELF CANCELLING TURN SIGNALS

You can enable or disable turn signal automatic cancellation.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

DRL

You can enable or disable DRL.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

TRIP A AUTO RESET

You can enable or disable the tripmeter A automatic reset mode.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

SPEED LIMIT

You can set the three set speed value, for use with Selectable Speed Limit Assist preset mode.

Display range:----, 20 to 130 km/h (15 to 80 mph)

Select one of the three set speed value display using or on the sel switch.

Select the desired setting using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

CHARGING SETTING

You can adjust the value of the CHARGING SOC^*1 LIMIT and CHARGING CURRENT LIMIT.

*1: SOC stands for State Of Charge.

CHARGING SOC LIMIT setting

Select the CHARGING SOC LIMIT using or on the sel switch and the press the on the sel switch.

Select the desired setting using or on the sel switch.

Display range: 80 to 100 %

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

CHARGING CURRENT LIMIT setting (AC charging only)

Select the CHARGING CURRENT LIMIT using or on the sel switch and the press the on the sel switch.

Select the desired setting using or on the sel switch.

Display range: 6 to 32 A

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

DISPLAY TYPE (SPORT)

You can change the display type only when riding mode is SPORT.

Select the display type ("BAR" or "CIRCLE") using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

BRIGHTNESS

You can adjust the backlight brightness to one of the eight levels or select the auto adjustment.

Automatic brightness control:

The display can become dark when the display is very hot. If it does not restore the original brightness, contact your dealer.

Select the "AUTO" or "MANUAL" using or on the sel switch.

When select the "AUTO"

Press on the sel switch to complete the setting.

When select the "MANUAL"

Press on the sel switch to select the backlight brightness using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

BACKGROUND

You can change the setting of the background to one of the two colours or select the auto adjustment.

Select the background colour using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

FAVORITE INFO

You can change the information items displayed in the INFO area and STATUS mode.

1 line information

You can change the information items displayed in the INFO area. (INFO area: )

1 line information setting:

2 lines information

You can change the information items displayed in the information page of status mode. (Information page: )

2 lines information setting:

Select the 1 line or 2 lines information using or on the sel switch.

Press on the sel switch, display moves to the 1 line or 2 lines information setting.

1 line information setting

Select the 1 or 2 using or on the sel switch.

Press on the sel switch to select the information items.

Select the desired information item using or on the sel switch.

Press on the sel switch, set the information item.

Items that have already been set are displayed with a green cursor.

Up to 9 items are available. (Including Blank)

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

2 lines information setting

Page Upper row Lower row Information item (Upper) Information item (Lower)

Select the desired page using or on the sel switch.

Press on the sel switch to select the upper or lower row.

Select the upper or lower row using or on the sel switch.

Press on the sel switch to select the information items.

Select the desired information item using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

FAVORITE SWITCH

You can change the items set for the favorite switch.

Select the favorite switch using or on the sel switch.

Press on the sel switch, set the item.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

AIR TEMP

You can display or hide the air temperature gauge.

Select the (On) or (Off) using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

DATE & TIME

Select the "Day", "Month", "Year", "Hour", "Minute", "24h or 12h" or "AM / PM" using or on the sel switch.

Select the desired setting using or on the sel switch.

When "24 / 12" is set to 24-hour indication, "AM / PM" cannot be usable.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

UNIT

You can change the speed and mileage units.

“TEMP.” is displayed but not selectable.

The "ELECTRIC CONS." is automatically selected depending on the speed unit.

The mileage unit is automatically changed depending on the speed unit.

Select the desired setting using or on the sel switch.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

The set value is retained.

LANGUAGE

Changes the system language.

Select the 1 or 2 using or on the sel switch.

Press on the sel switch.

Select the language using or on the sel switch.

Press on the sel switch to select the language.

Items that have already been set are displayed with a green cursor.

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

RESTORE DEFAULT

The set values can be returned to the default settings.

Select the “NO” (not restore) or “YES”(restore) using or on the sel switch.

When the “NO” is selected
Press on the sel switch. The set value is maintained, and then the display returns to the upper level hierarchy.
When the “YES” is selected
Press and hold on the sel switch. The set value return to default setting.

The following items are restored to their default values:

HSTC

DRL

TRIP A AUTO RESET

SPEED LIMIT

CHARGING SETTING

DISPLAY TYPE

BRIGHTNESS

BACKGROUND

FAVORITE INFO

The page of the currently selected INFO area and status mode are also initialized.

FAVORITE SWITCH

UNIT

LANGUAGE

SELF CANCELLING TURN SIGNALS

AIR TEMP

BLUETOOTH PAIRING RESET

You can reset the pairing record of Bluetooth^®.

Reset a Bluetooth^® pairing record after stopping at a safe place.

To connect the device

Make sure smartphone that you want to delete connection is connected to your vehicle.

To check if the smartphone is connected:

Select the “NO” (not reset) or “YES”(reset) using the or on the sel switch.

When the “NO” is selected
Press the on the sel switch. The pairing record is maintained, and then the display returns to the upper level hierarchy.

When the “YES” is selected
Press and hold the on the sel switch. Your smartphone connection is deleted and the pairing record is reset.

When reset is complete, "FINISHED" will be displayed.

If the pairing information remains in your smartphone even if the pairing information is deleted from the vehicle, the smartphone may be connected to the vehicle again.

MAINTENANCE

You can select the following:

PERIODIC MAINTENANCE

12v BATTERY VOLTAGE

WARNING INFO

PERIODIC MAINTENANCE 12v BATTERY VOLTAGE WARNING INFO : Press on the sel switch. : Press on the sel switch. : Press on the sel switch.

PERIODIC MAINTENANCE

You can check the next periodic inspection time.

You can change the setting of the next periodic inspection.

Distance Month Year Date

Display range:

Distance:

------, 12,000 to -99,999 km (8,000 to -99,999 mile)

Pass 0 km: “-” mark is displayed.

Changing the SPEED unit from "mile" to "km" will also display ranges over 12,000 km, depending on the distance.

Date:

Month: ---, JAN to DEC
Year: ----,2020 to 2099

Next inspection setting

Select the distance, month or year using or on the sel switch.

Distance Month Year Date

Select the desired setting using or on the sel switch.

If you press and hold on the sel switch while setting the distance, it will move every 1000.

Available setting range of the distance:

------, 100 to 12,000 km (100 to 8,000 mile)

Press on the sel switch to complete the setting.

Return to the ordinary display to complete the setting.

To continue setting, press on the sel switch to return to the upper hierarchy.

When reaching any of the following, the maintenance indicator is appears in the ordinary display.

“500 km” (“300 mile”) from the next periodic inspection.

One month before the set month.

Maintenance indicator

12v BATTERY VOLTAGE

Displays the current 12 V battery voltage.

WARNING INFO

Displays a current maintenance information and (or) warning information.

If your vehicle has warning information, have your vehicle inspected by your dealer as soon as possible.

Maintenance information Warning information

When the warning information displays, refer to following.

Indication	Explanation		Remedy
	When the periodic inspection time of your vehicle is approaching.		Have your vehicle inspected by your dealer.
	High voltage battery health low.		Have your high voltage battery inspected by your authorised dealer.
	Abnormality of the high voltage battery.		Have your vehicle inspected by your authorised dealer as soon as possible.

SYSTEM INFORMATION

Displays the software version and hardware information.

Recommended topic(s)
Switches
INFO area
Honda RoadSync